Spark Plugs

[Inizes]

Need to do spark plugs. I picked up some NGKs from FCP Euro - do they need the be gapped? Do I need to measure and verify they are correctly gapped already? Thoughts on using a high temp anti seize? Looks like torque is 22 ftlbs.

[Slideways]

Stock NGK proven to be reliable (no need to gap)
No anti-seize
18 ft-lbs

[Inizes]

Stock NGK proven to be reliable (no need to gap)
No anti-seize
18 ft-lbs

You’re right I actually got NGKs, but thank you for the other two.

[Inizes]

Actually found this too, should have referenced first. To confirm, no gapping required?

[Slideways]

No gapping for the stock NGKs. They have two ground electrodes that aren't gapped like the single ground electrode spark plug. I believe the center electrode wears on the NGKs, not the ground.

[heinzboehmer]

Actually found this too, should have referenced first. To confirm, no gapping required?

Those come pre-gapped, so no need to gap. You could measure if you want to be sure that they're correct, but they should be fine.

[Tbonem3]

I double check gap .32

[JokerElite]

I double check gap .32

+1 for double checking the gap.