MCS + End links combo?

[x Spades x]

Hey Everyone,

I bought an MCS 1WNR system a. I just have a question regarding end links. I have OEM front and rear sway bars and id like the first install the suspension and get a feel before sway bar change.

I want to get Turner sways, but does anyone know the length end links I need for the oem front sway?

TIA!!

[samthejam]

I am using E28 Swaybar end links with a Hotchkis swaybar, because I had them and I want a sealed balljoint.

Stock length end links are too long IIIRC.

I got Hotchkis ones which were the max of this length and they did not work. 9.75-10.75 actual length (247-273mm).

https://www.bimmerworld.com/Suspension-Steering/End-Links/7-9-5-Strut-Mounted-Swaybar-End-Links_3.html

I am pretty sure they are much closer to the lower side or middle of that range.

[prostcfc]

These are the ones Bimmerworld sold me when I bought a 1WNR package from them this month; I haven't installed yet: 9.75-10.75" Strut Mounted Swaybar End Links https://www.bimmerworld.com/Suspensi...d-Links_3.html

[eacmen]

These are the ones Bimmerworld sold me when I bought a 1WNR package from them this month; I haven't installed yet: 9.75-10.75" Strut Mounted Swaybar End Links https://www.bimmerworld.com/Suspensi...d-Links_3.html

BW sold me the 7”-9.5” end links for the Ground Control sway bar. There is a fair mount of adjustability there so you should be ok with either option

[prostcfc]

https://nam3forum.com/forums/forum/main-forum/e46-2001-2006/103185-mcs-dampers-and-end-links-what-size