E46 SMG relocation diagrams videos

[E46m32002]

SMG relocation information please about to attempt this thanks for any help I can get newbie here

[E46m32002]

Any body who has done this on this forum who can help guide or have diagrams or video walk through etc on how I can get this done
I have the burkhart kit and ready to attempt also I have the inpa software

[0-60motorsports]

Just remove from the original location. Install the lines and longer harness, position the pump and top up the fluid and start the bleeding procedure. People have mentioned to keep the pump in the factory upright position when bleeding and then installing it in the Burkhart bracket after done successfully.

[TramRam]

SMG relocation information please about to attempt this thanks for any help I can get newbie here

I'm soon to relocate my hydraulic pump. I've got the extended hydraulic lines & the longer electrical harness.

Are you done with relocating yours? It's pretty much crickets on this subject since many did theirs long ago or converted to manual. It's current stuff for me. I've got a borrowed pump to use as a mockup to design a support bracket since nobody makes it anymore. Mine has to ride next to my DCS module in the passenger side cowl.

[0-60motorsports]

I'm soon to relocate my hydraulic pump. I've got the extended hydraulic lines & the longer electrical harness.

Are you done with relocating yours? It's pretty much crickets on this subject since many did theirs long ago or converted to manual. It's current stuff for me. I've got a borrowed pump to use as a mockup to design a support bracket since nobody makes it anymore. Mine has to ride next to my DCS module in the passenger side cowl.

BURKHART bracket will fit your car......contact them to see if they will sell you just the bracket. If you are handy at DIYing it then just do that as it'll be much faster.

https://ind-distribution.com/products/burkhart-engineering-e46-m3-smg2-pump-relocation-kit?variant=44465835311300

[Ramage]

You can order just the brackets here - https://burkhart-engineering.com/sho...-inkl-csl-bmw/

[oceansize]

Post 15 has a DIY.

https://nam3forum.com/forums/forum/main-forum/e46-2001-2006/4010-fyi-troubleshooting-smg-relocation-problems