Announcement
Collapse
No announcement yet.
Part Number Help
Collapse
X
-
I do not think you will find that separately.
One cable can be unclipped from the black cylinder and the other side depinned from the yellow connector under the seat.
The other cable routes up into the the buckle itself.
Your best bet is to buy a used buckle assembly.
I do have one of these but the one side that runs up into the buckle portion is clipped.
I think the cylinder is for the pre-tensioning so if that clip connection to the black cylinder part gets loose you'll get the airbag/abs light.
Edit: here is an under seat photo, I can take a photo of the buckle as well if you need it as I have the D.S buckle assembly off the seat currently.
The left side connection is just two pins and the other side can be unclipped from the cylinder on the buckle assembly, the middle connection is hard wired to the buckle assembly.
Last edited by Cubieman; 09-09-2026, 12:08 PM.2004 Silbergrau Metallic 6MT
Karbonius/OEM Snorkel/Flap/HTE Tuned
Ssv1/Catted Sec. 1/SS 2.5" Sec. 2/SCZA
OE CSL Bootlid/AS SSK/TCK Vorshlag/4.10 Gears/ Sportline 8S Wheels/Cobra Nogaros
RACP Plates/Vincebar/CMP/Turner RTAB/Beisan
2006 M6 Black Saphire SMG
Instagram
- Likes 1
-
Thank you for responding. I think I need to pull the sear and see what’s going on, and I will ask you a specific question. I’m ignorant to interior and airbags, just want this light off.Originally posted by Cubieman View PostI do not think you will find that separately.
One cable can be unclipped from the black cylinder and the other side depinned from the yellow connector under the seat.
The other cable routes up into the the buckle itself.
Your best bet is to buy a used buckle assembly.
I do have one of these but the one side that runs up into the buckle portion is clipped.
I think the cylinder is for the pre-tensioning so if that clip connection to the black cylinder part gets loose you'll get the airbag/abs light.
Edit: here is an under seat photo, I can take a photo of the buckle as well if you need it as I have the D.S buckle assembly off the seat currently.
The left side connection is just two pins and the other side can be unclipped from the cylinder on the buckle assembly, the middle connection is hard wired to the buckle assembly.
Just some old shitty cars.
Comment
-
The wire with the arrows pointing to each end, make sure the connections are good on both sides.
You'll likely need to remove the seat to check the connection on the buckle side.
2004 Silbergrau Metallic 6MT
Karbonius/OEM Snorkel/Flap/HTE Tuned
Ssv1/Catted Sec. 1/SS 2.5" Sec. 2/SCZA
OE CSL Bootlid/AS SSK/TCK Vorshlag/4.10 Gears/ Sportline 8S Wheels/Cobra Nogaros
RACP Plates/Vincebar/CMP/Turner RTAB/Beisan
2006 M6 Black Saphire SMG
Instagram
Comment
-
You’re the man. That is exactly it. Thank you.Originally posted by Cubieman View PostThe wire with the arrows pointing to each end, make sure the connections are good on both sides.
You'll likely need to remove the seat to check the connection on the buckle side.

Mine is frayed, I am going through a mid-ownership-crisis and getting irritated with my interior. Currently redoing pillars and headliner. I am just worried if I pull the seats, I’ll get carried away and explode my budget
.
Just some old shitty cars.
- Likes 1
Comment

Comment