Announcement

Collapse
No announcement yet.

BBS CH-R fitment

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    BBS CH-R fitment

    Looking to buy a used set of BBS CH-R’s

    19x9 ET20
    19x10.5 ET25

    Would I have any issues running these specs? Probably would do new PS4S in 235/35/19 and 265/30/19. Any issues here? Do I need to run spacers or anything?

    #2
    The fronts will sit like you are running a 39mm spacer on the factory 19" wheels, and the rears will sit like you are running 15mm spacers on the factory 19's. I don't have any direct experience on clearance, but that CHR barrel will be 10mm closer to the shocks.
    2006 E46 M3 Interlagos Blue ZCP Slicktop
    Build Thread: https://nam3forum.com/forums/forum/m...6-m3-ownership

    Comment


      #3
      39mm spacer equivalent on the front is bad haha

      Comment


        #4
        BBS CH-R fitment guide: do not install these heavy as sin wheels.
        Instagram: @logicalconclusion

        Comment


          #5
          Originally posted by EthanolTurbo View Post
          BBS CH-R fitment guide: do not install these heavy as sin wheels.
          You're not wrong. Really trying to find a set of OE ZCP wheels but it's been hard.

          Comment


            #6
            Originally posted by simon_c View Post
            39mm spacer equivalent on the front is bad haha
            yeah a little bit haha
            2006 E46 M3 Interlagos Blue ZCP Slicktop
            Build Thread: https://nam3forum.com/forums/forum/m...6-m3-ownership

            Comment


              #7
              19x9 et 20 would be really aggressive, but people have done it.

              If you don't mind running 3 degrees of camber then they will work.

              The back is pretty aggressive as well, definitely stay with a 265 in the rear.
              2004 Dinan S3-R M3
              2023 X3M Competition

              Comment


                #8
                Those CH-Rs are E9XM fitment. I would not want those on an E46. And a 265 is already stretched on a 10" wheel.

                Comment


                  #9
                  these popped up for sale local to me. I think the front will work fine, you'll maybe want a small spacer. Rear is a bit aggressive but I'll leave it to others to chime in.

                  Looking to trade for or purchase a nice set of Style 270’s. Wheels up for trade are a staggered set of BBS CH-R’s that have been freshly powder coated with no defects, wrapped in an almost new set...

                  Comment


                    #10
                    Originally posted by Slideways View Post
                    Those CH-Rs are E9XM fitment. I would not want those on an E46. And a 265 is already stretched on a 10" wheel.
                    Technically 255 is within spec for a 10" wheel. 265 is fine.

                    Comment


                      #11
                      Originally posted by terra View Post

                      Technically 255 is within spec for a 10" wheel. 265 is fine.
                      255 and 265 drive like shit on a 10" wheel. The sidewall is so stretched it isn't usable. It would have to be a 265 that runs wide like a 275ish.
                      Last edited by EthanolTurbo; 09-10-2026, 10:05 PM.
                      Instagram: @logicalconclusion

                      Comment


                        #12
                        I have that spec wheel set on my car. I’ll take a picture later.
                        Just some old shitty cars.

                        Comment

                        Working...
                        X