Review: Cobra Nogaro seats (uniquely street friendly fixed back bucket seat)

[repoman89]

I was supposed to get the nuts with mine but HMS missed it somehow. Luckily the seat fits me perfectly without any lumbar support .. unlike my OEM non-lumbar seats which were terrible for my back. Really depends on body shape.

[tlow98]

Came for the seat review. Stayed for the sack content.

Too far?

[Tbonem3]

That's "Mr. Commando" to you.

[jet_dogg]

Forgot to post this. My in laws got me the official nogaro lumbar support.




It works great, but I don't love the nutsack sticking out

This guy free ballin giving zero fucks.

[Obioban]

I left my nuts hanging, doesn't bother me. Did consider tucking them underneath the leather on the side, did you route the air hose in the slot under the seat base?

Regards

My seats came with the lumbar cushion, so there was a hole for its air line.

[ridebikes]

This thread has taken a surreal turn, lol

[Mr.wReckless]

I tucked the nut sack under the seat leather on the tunnel side. I can still sneak my hand between the console and seat to squeeze it, but it's 100% out of sight.

I left my nuts hanging, doesn't bother me. Did consider tucking them underneath the leather on the side, did you route the air hose in the slot under the seat base?

Regards

[Obioban]

I tucked the nut sack under the seat leather on the tunnel side. I can still sneak my hand between the console and seat to squeeze it, but it's 100% out of sight.

[0-60motorsports]

Forgot to post this. My in laws got me the official nogaro lumbar support.




It works great, but I don't love the nutsack sticking out

Hahahhahaha love it!!!! Those seats really are awesome.

[Tbonem3]

Forgot to post this. My in laws got me the official nogaro lumbar support.




It works great, but I don't love the nutsack sticking out

[elbert]

oops nevermind

[Epoustouflant]

Matt-
Do you have the part numbers for the connectors at the seat motors and for the connector that clips into that big yellow plug?

Would you know the part numbers for the pins as well?

Thanks!

I do not. BK provides these with their kit.

[t44tq]

I just finished wiring my Pole Positions with BK mounts for OE electric sliders. I also fitted a new Airbag Occupancy Sensor.

Matt-
Do you have the part numbers for the connectors at the seat motors and for the connector that clips into that big yellow plug?

Would you know the part numbers for the pins as well?

Thanks!

[Epoustouflant]

I just finished wiring my Pole Positions with BK mounts for OE electric sliders. I also fitted a new Airbag Occupancy Sensor.

[Obioban]

Obioban
Follow up question- how did you do the wiring? The sliders I got have everything, but no wiring, so I need plugs and pigtails at the very least.

The B-K brackets have the wiring pinout for the E30 switch, but the instructions are completely unclear about the actual seat motors- labeled I, II, III and IV.

Looks like I need to get an E30 pigtail for the window switch and pigtails for the two connectors on the power seat motor in order to make this work. Any advice on sources? I'll be searching on Google, Ebay, etc.

IIRC the motors only have two wires that matter (the thick ones), and which way you run the current determines which way the motor moves.

That said, I don't remember how I did the wiring anymore, and my car is on 2x manual sliders at this point.