My passenger side front bumper has excessively large panel gaps around the headlight housing area. I've taken a few photos (attached) showing the difference in size of the panel gaps between driver side and passenger side. I've also noticed that, on the driver side, my fog light no longer clips in correctly, like the sizing is slightly off. Around a year back I hit a piece of tire which flew out from a car in front me, and I'm guessing this has caused the issue. Are there any adjustments I can do to resolve it, or would this be best solved by a new bumper?
Announcement
Collapse
No announcement yet.
Front Bumper Panel Gap Issues around headlights (passenger side)
Collapse
X
-
It’s an easy fix, you’ll have to remove the corner lights and inside there is a white plastic piece with two bolts. That is the bumper guide. Loosen both bolts (without taking them out) until you’re able to move the guide by pushing on the bumper. To get good bumper fitment you can use a small jack to help you and push up from the bottom of the bumper and tighten back the bolts on the guide. I was able to do it without a jack but it’s a lot easier with one.
- Likes 1
-
Subscribed, thanks for the tip erickhoyosInterlagos 06 M3, Autologic tune, Agency Power midpipes/exhaust, Fortune Auto coilovers, UUC SSK, Bluebus, Lightwerkz retrofit. MRegistry listing here
Comment
-
How's the panel gap UNDER the headlights? You're probably missing the foam and/or the Kevlar support is too low on the core support and the whole bumper needs to come up
Sent from my iPhone using Tapatalk2003 E46 M3 TiAg/Cinnamon 6MT
2005 E46 330i ZHP Imola/Sand
| Karbonius | Schrick | Supertech | Volk | Recaro | FCM | SuperSprint | Turner | Hyperco | GC | PFC | VAC | OMP | Radium Engineering | MPRacing |
Instagram:@thegenius46m
NorCal DME Programming and Coding Expert
- Likes 1
Comment
-
The foam pieces under the headlight area on top of the bumper support were missing creating large gaps. I could slide my fingers between the lights and the bumper cover.
I epoxied some foam pieces from an RC airplane broken wing and problem solved.2004 Silbergrau Metallic 6MT
Karbonius/OEM Snorkel/Flap/HTE Tuned
Ssv1/Catted Sec. 1/SS 2.5" Sec. 2/SCZA
OE CSL Bootlid/AS SSK/BC Coils/4.10 Gears/ Sportline 8S Wheels/Cobra Nogaros
RACP Plates/Vincebar/CMP/Turner RTAB/Beisan
2006 M6 Black Saphire SMG
Instagram
Comment
-
Bumper guide adjustment didn't work for me, will try putting some foam pieces in next month when I tackle headlights again.Interlagos 06 M3, Autologic tune, Agency Power midpipes/exhaust, Fortune Auto coilovers, UUC SSK, Bluebus, Lightwerkz retrofit. MRegistry listing here
Comment
-
Originally posted by thegenius46m View PostHow's the panel gap UNDER the headlights? You're probably missing the foam and/or the Kevlar support is too low on the core support and the whole bumper needs to come up
Sent from my iPhone using TapatalkDD: /// 2011.5 Jerez/bamboo E90 M3 · DCT · Slicktop · Instagram
/// 2004 Silvergrey M3 · Coupe · 6spd · Slicktop · zero options
More info: https://nam3forum.com/forums/forum/m...os-supersprint
- Likes 1
Comment
Comment