Announcement

Collapse
No announcement yet.

Vibra-technics transmission brace

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Vibra-technics transmission brace

    Has anyone used this on their car and have some feedback?

    IG: https://www.instagram.com/mspir3d/

    #2
    Originally posted by Mspir3d View Post
    Has anyone used this on their car and have some feedback?

    https://www.vibra-technics.com/bmw/e...ed_m3_s54_only
    The OE Ones last a long time. I don’t know if I would bother with this. Their engine mounts are crap, they failed on me in under 3-5000miles (can’t remember exact mileage) and they wouldn’t sell the rebuild kit anymore. As soon as I changed the my old OE engine mounts all vibrations gone.

    Comment


      #3
      I have both their engine and trans mounts for a few years and they've been great with no issues. Better shifting feel was an added bonus.

      Just as a heads up, if you have a larger diameter Section 1 like an SS V1, I think you'll have clearance issues.

      Comment


        #4
        That's a very good point, I do have a downpipe that runs over the top there. Clearance might be a concern.

        I'm having problems finding 2nd gear after a hard launch at the track. I feel like the transmission is twisting with the extra torque. Right now I have RE bushing but I don't think they are enough.
        IG: https://www.instagram.com/mspir3d/

        Comment


          #5
          These fixed my 2nd gear issue where 2nd would go missing on track while trail braking into a turn, but I'd definitely do your homework with your downpipe clearance.

          Comment


            #6
            Originally posted by Jickel180 View Post
            I have both their engine and trans mounts for a few years and they've been great with no issues. Better shifting feel was an added bonus.

            Just as a heads up, if you have a larger diameter Section 1 like an SS V1, I think you'll have clearance issues.
            Yeah- didn’t clear my SSV1s.

            2005 IR/IR M3 Coupe
            2012 LMB/Black 128i
            2008 Black/Black M5 Sedan

            Comment


              #7
              Originally posted by Obioban View Post

              Yeah- didn’t clear my SSV1s.
              Cleared mine with no OE heatshield.

              Comment


                #8
                I hosted the original GB for these (along w/the engine mounts), and most ppl seemed to genuinely like them. I’ve had mine for around 5yrs or so now, & still love them! Mine cleared fine w/the SSV1 section I...but a couple/few folks had clearance issues. Chalk it up to different combinations of motor mounts & slight factory variations I guess.

                Comment

                Working...
                X