Eibach Pro Street-S -- Spring rate changes

[Rudbari]

I had an end link fail as well. Just get the Turners. They work well and are readily available.

which one from turners you get . If you don’t mind sharing.

[D-O]

You bet.

https://www.turnermotorsport.com/p-339009-e28-e30-e34-e36-e39-e46-e9x-mz3-z4-turner-motorsport-adjustable-front-sway-bar-end-links-pair/?pdk=AQ

[0-60motorsports]

I worked at Eibach for 13 years and personally tested these with multiple rates. I recommended to most people to put the 450# spring from the back up front and then order a 550# spring for the rear. This makes a very noticeable difference. The shocks are also monotube with 195psi of nitrogen. They shouldn't blow out after 3 years but these are wear items.

I've had a modified version of these shocks on my M3 for 10 years with reservoirs (independent compression and rebound adjustments) and I'm on 650/750# springs. I just had the front shocks rebuilt last month for the first time.

Hey Bro, would you happen to have the PN for the 550# rear springs?

[tr3flip]

Hey Bro, would you happen to have the PN for the 550# rear springs?

I'm pretty sure they're using 6" springs on those. Part# 0600.250.0550

[0-60motorsports]

I'm pretty sure they're using 6" springs on those. Part# 0600.250.0550

Thanks brother. Good to know in case I decide to go for the eibachs

[Rudbari]

You bet.

https://www.turnermotorsport.com/p-3...s-pair/?pdk=AQ

thanks mate