Brake Fluid Light

[sg.e46m3]

Hi,

I'm having problems with my brake fluid light, the reservoir is full and i'm not experiencing any leaks. i was thinking it could maybe be the sensor inside the reservoir is malfunctioning?

I was thinking about replacing with this part:

https://www.fcpeuro.com/products/bmw...ir-34326750798

my question was, is this the correct part? would this solve my problem?

thanks!

for reference:

2005 silver grey convertible
114,xxx km
bilstein b12 prokit (eibach springs)
wheels are hre 540r 245/35/19 275/30/19
front lip is happybuyitnow (ebay) gloss black plastic

[eacmen]

This should do it: https://www.fcpeuro.com/products/bmw...ap-34336774451

[sg.e46m3]

I replaced the sensor and the brake fluid light is still red. What could it be? Shouldn’t it just turn off by itself?

[Stack]

Are you talking about the yellow light that’s circular
If so,
Have you checked your pad wear

The light comes on if your pad thickness is below a certain level.


Sent from my iPhone using Tapatalk

[sg.e46m3]

It looks like ((!)) but red

all four brake pads are good and fluid is good also.