Dumb Question Thread - No Flaming Allowed

[fattycharged]

Hmm, mine were new. Maybe they're not as thick as originals?


Sent from my iPhone using Tapatalk

[Tbonem3]

Anyone remember how many selector rod washers were needed when installing their AS SSK?

I was surprised to need 2 per side, double OE, to make it snug?


Sent from my iPad using Tapatalk Pro

Yes I did that with old ones.

[fattycharged]

Anyone remember how many selector rod washers were needed when installing their AS SSK?

I was surprised to need 2 per side, double OE, to make it snug?


Sent from my iPad using Tapatalk Pro

[BigRussia]

Theres rubber in that channel, I would remove that first with a wire wheel. Then you can roll the inner fender flat to the outer fender.

Ah interesting, I was wondering why even with the fender pull the lip wasnt flat and still so thick. Thanks, yeah that sounds like a better solution, ill try that instead of cutting, less chance of accidentally cutting a spot weld too lol.

EDIT- following up, after taking another look at the inner lip, the shop that pulled the fenders pinched the top of the lip ‘channel’ closed, so wont be able to get a wire wheel in there to clear out the rubber :/

[jayjaya29]

Theres rubber in that channel, I would remove that first with a wire wheel. Then you can roll the inner fender flat to the outer fender.