I don't know much about metal, welds etc. so I wondered if this could be fixed by me maybe with some heat/pliers/leverage.
Announcement
Collapse
No announcement yet.
Dumb Question Thread - No Flaming Allowed
Collapse
This is a sticky topic.
X
X
-
I bought a used full exhaust system for my M6, supposedly Dinan, at least the mufflers. My issue is that one of the resonators is bent on the outlet side.
I don't know much about metal, welds etc. so I wondered if this could be fixed by me maybe with some heat/pliers/leverage.
- Likes 1
-
Adaptations get reset when the battery is undone as well. You'll be fine. Will take some time for smog monitors to set.
- Likes 1
Leave a comment:
-
I was running INPA and the laptop slid off my lap. I accidentally pressed F7 reset adaptations while the car was running. How screwed am I? Thanks
Leave a comment:
-
Might want to check your local BMW dealer as getbmwparts is $20 cheaper.Originally posted by Nate047 View Post1. Are there any non Genuine BMW center support bearings that are as good and lower cost? (Yes I know they are only like $150 to start with)
.
- Likes 2
Leave a comment:

Leave a comment: