Announcement

Collapse
No announcement yet.

BaT E46 LSB M3

Collapse
X
Collapse
 
  • Page of 10
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 10 template Next
    #1

    BaT E46 LSB M3

    Well. Figured I'd intro my M3 after having this for about 5 months now. Picked this up on BaT. Yes, it was highly modified, and wasn't stock, but it didn't bother me. It was local and I didn't have to ship it either.

    Lo and behold, it was someone I had work with before on my other cars, so the transaction was easy and if there were any issues, I could take it to him. It was all worth it though.

    Mods aren't all done yet, but in due time. The Mile End CSL front is on the way, waiting to alcantara wrap the headliner before the CSL Roof goes on, so should be done before January. Then it's refresh the diff and probably rebuild/reinforce the engine to be bulletproof. Not going to oversize the bore or anything, just want that OEM+ and keep it NA all the way.

    Mods on it when I purchased it:

    Vorsteiner GTS3 Diffuser
    Autosolutions Ultimate Short Shift Kit
    Rogue Engineering Diablo Exhaust
    CPI Rasp Terminator
    Status Gruppe Sec 2
    Status Gruppe Carbon Fiber CSL Front Bumper/One-Piece Lip
    Apex ARC-8 Wheels
    Ground Control Coilovers
    Dinan Intake
    Dinan Throttle Body
    Dinan Front Strut Bar
    Dinan Pulleys
    Dinan Stage 4 Software
    Mishimoto Aluminum Radiator and Electric Fan


    Mods Post Purchase

    New OEM Diff/Pumpkin
    MK60 ZCP ABS Upgrade (Still haven't figured out who can retrofit this)
    Mile End Composites CSL Front Bumper
    Evolve CSL Race Airbox
    -OEM CSL Air Rail
    -Turner Alpha-N IAT Sensor Relocation Kit
    Kassel HP CSL ECU Conversion
    HTE Tune (336whp)
    OEM CSL Cams and DLC Coated Schrick Rockers
    OEM CSL Handbrake
    OEM CSL Brake Boot
    Karbonius CSL Door Panels
    Karbonius CSL Center Console
    Dixis Titanium Exhaust
    OE Euro Headers
    Stoptech Trophy Nickel-Finished ST-60F/ST-40R BBK (355x32 F/R)
    AutoTecknic Gloss Black Kidney Grills
    AutoTecknic Gloss Black Fender Grills
    BMW M Perf Pedals
    CAE Ultra Shifter “Street” Version - Anodized Black
    Rogue Engineering LE MCL Rear Control Arms
    Diftech Caster/Camber Plates
    Vorschlag Rear Shock Mounts with Reinforcement Plates
    Ohlins R&T
    Sparco SPX Carbon Seats
    -Sparco 600 Series Seat Bases
    Bavsound HK Speaker Upgrade
    RKP E46 M3 Carbon Roof
    -OEM CSL Headliner (Sunroof Delete)
    -OEM CSL Roof Rail Mouldings
    -OEM Roof Bow
    -OEM Window Seals (F/R)
    -OEM Front Windshield
    BBS RSII
    19x9.5 +31 (2” lip with 12mm spacers for BBK clearance = +19)
    19x11 +25 (3” lip)
    BBS LM-R
    19x9.5 +35 (10mm spacer for BBK clearance = +25)
    19x11 +26 (15mm spacer)
    BBS Ti Blue Race Nuts
    MRG Ti Stud Conversion Kit



    Last edited by ra2fanatic; 04-08-2021, 09:59 PM.
    Tags: None
    • Likes 3
    #2
    Wow that's a lot of coin post purchase. Any pics with the RSII or Sparcos? Car looks tops!

    Comment

      #3
      Wow, nice ride! Impressive list of mods there.
      2004 Silbergrau Metallic 6MT
      Karbonius/OEM Snorkel/Flap/HTE Tuned
      Ssv1/Catted Sec. 1/SS 2.5" Sec. 2/SCZA
      OE CSL Bootlid/AS SSK/BC Coils/4.10 Gears/ Sportline 8S Wheels/Cobra Nogaros
      RACP Plates/Vincebar/CMP/Turner RTAB/Beisan

      2006 M6 Black Saphire SMG
      Instagram

      Comment

        #4
        Originally posted by freshprince2421 View Post
        Wow that's a lot of coin post purchase. Any pics with the RSII or Sparcos? Car looks tops!
        Here are the Sparcos and when I had an RTD briefly.

        • Likes 2

        Comment

          #5
          Those LM-Rs. Damn.
          Just some old shitty cars.

          Comment

            #6
            Originally posted by 02_lsb View Post
            Those LM-Rs. Damn.
            Looks like BBS RSII's to me. Aka my dream wheels. Beautiful car!

            Comment

              #7
              I'm contemplating adding a 3rd set of wheels....but I'm already feeling guilty with having a 2nd set, so we'll see....It'd likely be a set of TE-37V Mark II's...

              Comment

                #8
                Originally posted by Triqzy View Post

                Looks like BBS RSII's to me. Aka my dream wheels. Beautiful car!
                First picture is LM-Rs
                Just some old shitty cars.

                Comment

                  #9
                  OP knew what he wanted! Those ST bbk's in nickel look just as good as imagined.

                  What's next on the to-do list?
                  '05 M3 Convertible 6MT, CB/Cinnamon, CSL Airbox&Flap, PCSTuning, Beisan, Schrick 288/280, SS V1's & 2.5" System, RE Stg 1&SMF, KW V2, CB PS, Apex EC-7R

                  Comment

                    #10
                    Originally posted by jbfrancis3 View Post
                    OP knew what he wanted! Those ST bbk's in nickel look just as good as imagined.

                    What's next on the to-do list?
                    Thank you! Today, I'll be working on removing the interior trim so they can get wrapped in alcantara. Waiting on new front windshield to arrive. And then off to the shop to get the RKP roof installed. Other than that, that's really the last big ticket item I've got planned!
                    • Likes 1

                    Comment

                      #11
                      Thats an amazing looking car and that list is very admirable. How you like the el diablo exhaust?

                      Comment

                        #12
                        Originally posted by trudriv3r View Post
                        Thats an amazing looking car and that list is very admirable. How you like the el diablo exhaust?
                        Loved it. But now I have the Dixis which is what the Diablo was based off of, but it is waaay lighter hence why it only required one hanger on each side rather than the 2/1 like most mufflers. Absolute quality on the Dixis

                        Comment

                          #13
                          Very nice car you have here. Since you’re running out of stuff to do I would look into getting cams and followers.

                          With such a fine list of mods I would definitely remove the Status Gruppe section 2. Look into the Supersprint dual pipe 2.5 section 2.
                          Last edited by DropTopKingM3; 12-05-2020, 07:08 PM.

                          Comment

                            #14
                            Originally posted by DropTopKingM3 View Post
                            Very nice car you have here. Since you’re running out of stuff to do I would look into getting cams and followers.

                            With such a fine list of mods I would definitely remove the Status Gruppe section 2. Look into the Supersprint dual pipe 2.5 section 2.
                            Engine rebuild will be next yr's project. Gotta give myself a break since I've spent a solid 5 figures already. SG sec 2 doesn't bother me. I may go Rogue sec 2 down the line.
                            • Likes 1

                            Comment

                              #15
                              Originally posted by ra2fanatic View Post

                              Engine rebuild will be next yr's project. Gotta give myself a break since I've spent a solid 5 figures already. SG sec 2 doesn't bother me. I may go Rogue sec 2 down the line.
                              Yes a break is definitely needed. I’m sure it costed a ton but the end result was well worth it. Looking forward to seeing your progress.

                              Comment

                              Previous 1 10 template Next
                              Working...
                              X