Failed vanos test post Beisan

[Cubieman]

I drove my car for the first time after my vanos overhaul and it would appear that I failed the vanos test. I did a vanos test previous to the beisan parts being installed and when the test was finished it said "Vanos system in Ordnung", aka, "Vanos system in Order".

I did not get the same message "vanos system in order" this time. Here is what follows, I will be trying google what all of these 3 things listed are but any help would be great.

Also, no errors present.

Edit: Rough google translation:

1. Pressure relief valve check switch, repeat function test

2. Solenoid valve set renew, repeat function test

3. If error farther occurs hydraulic unit switch

I reset ALL adaptations via Martyn's tool before the first test drive.