Chase Bays Fluid Relocation Tanks

[Jersey_M3]

Has anyone used either of these items? They seem to be a decent way of relocating some weight from over the front axel. Any reviews or suggestions would be appreciated. Im more concerned about the coolant overflow as ours in the M3 is actually pretty solid.

1. https://www.chasebays.com/collection...cooler-sprayer
2. https://www.chasebays.com/collection...olant-overflow

[STAATS]

I replaced my windscreen washer tank with the Chase Bays part so I could put it in the old SAP location and have more room for brake cooling ducts. It works fine. Get about 3 washes out of it before it empties so perfectly usable for me. The pump pressure is slightly lower than original so the jet isn't as aggressive. Apparently you can reduce the hose sizes near the nozzles to help increase the pressure again but I've never bothered.

[Jersey_M3]

I replaced my windscreen washer tank with the Chase Bays part so I could put it in the old SAP location and have more room for brake cooling ducts. It works fine. Get about 3 washes out of it before it empties so perfectly usable for me. The pump pressure is slightly lower than original so the jet isn't as aggressive. Apparently you can reduce the hose sizes near the nozzles to help increase the pressure again but I've never bothered.

Did it come with everything needed to relocate or did you need to source parts yourself

[STAATS]

Did it come with everything needed to relocate or did you need to source parts yourself

It is just the tank and pump with a flying lead. Oh and there is also like 6 mounts you can pick to come with it... but in general you need to figure out the mount yourself, their mounts are just generic.