Turbo builds

[Nicholas1996]

Only 11.7psi on e85 (Safe street tune for now). The car should be around 15psi after a dyno tune. The pump shouldn’t have an issue keeping up.

The car has -6an PTFE lines, a radium fuel rail and no inline pump. The hellcat should be able to support the 650whp goal no problem.

On 15 psi I made 650whp with my 6266. Ran it all the way up to 22 psi. Unfortunately the ring land on cylinder 2 let go. Just finished the rebuild last week and Im going to start the car up today, as I installed the engine yesterday

[TylerBrown]

I have the same fuel system. How far have you pushed it power wise.

Only 11.7psi on e85 (Safe street tune for now). The car should be around 15psi after a dyno tune. The pump shouldn’t have an issue keeping up.

The car has -6an PTFE lines, a radium fuel rail and no inline pump. The hellcat should be able to support the 650whp goal no problem.

[Dtmpowerjc]

I am currently in the process of installing a custom kit purchased back in December.

gt35 .70
technica Intake/exhaust manifold, intake pipes and ic
1400cc injectors
rolling antilag
flex fuel
walbro 540 intank + Bosh secondary
hexapump oil pump
proefi 120
proefi ignition coil packs
radium fuel rail + variable fpr
can display logger
synapse bov
Full 3.5 exhaust with Tial wastegate dump
radium catch can
+ some other tidbits. No power numbers or drive ability as it’s yet to be fully installed and tested.

[Nicholas1996]

Precision 6466
Steed Speed manifold
Tial wastegate, HKS bovs
AEM infinity w/ flex fuel
Hellcat single pump
FIC 1100cc injectors
HPF plenum
3 port

I have the same fuel system. How far have you pushed it power wise.

[M3AN ONE]

Curious to see how this turns out

[Mspir3d]

I really want to run a BW turbo. I have no one to weld the wastegate housing though.

The BW is super laggy compared to the 6266 I started with. If I had originally built the engine, I would have stuck with the 6266 or gone to a 6870 with their fast spool. Now I'm building it and I wish I hadn't have gone with the BW. I may try max it out and see how much it makes though. It was running 25 psi the last time I had it out.

[TylerBrown]

Precision 6466
Steed Speed manifold
Tial wastegate, HKS bovs
AEM infinity w/ flex fuel
Hellcat single pump
FIC 1100cc injectors
HPF plenum
3 port

[Nicholas1996]

BW 64.5/67
SPA exhaust manifold
tial wastegate and synapse bov
flex fuel
2 walbro 485 pumps
ID1000 injectors
radium engineering surge tank

I really want to run a BW turbo. I have no one to weld the wastegate housing though.

[Nicholas1996]

Looking to start my build this summer!

did you install everything yourself or pay a shop to? I’m trying to get any idea of what hurdles I have to look forward to haha

Hey. Yeah installed all myself. Please message me if you have questions.

[Mspir3d]

BW 64.5/67
SPA exhaust manifold
tial wastegate and synapse bov
flex fuel
2 walbro 485 pumps
ID1000 injectors
radium engineering surge tank

[Hallerhan]

Looking to start my build this summer!

did you install everything yourself or pay a shop to? I’m trying to get any idea of what hurdles I have to look forward to haha

[Nicholas1996]

Looking for people to share their builds. Mine is as such
6266 precision
spa manifold
tial bov and wastegate
mac 4 port
fsr intake manifold
aem infinity


lets all exchange some info on turboed e46 m3s