Took a few days to get to car stuff, but the test fit (with 3/8-16 freedom fasteners) went okay. Install is a bit fussy and I missed a couple dimensions by ~2mm but with the undersized fasteners and a couple washers it all went together. Fitment pics:
It's definitely noticeable. Similar to adding the Slon brace, it taughts up the car, especially felt on angled bumps, lumps, dips and step changes in street height. I've only got one run to the hardware store with the wife in it, so not a lot of seat time, but enough to tell a difference right away. I would say it's about 1/3 as drastic a change as the Slon brace, and it's either placebo or I can actually tell that the suspension is articulating more. Not sure yet. For the first time, I felt like the car could use more spring rate (or maybe just stiffer shock mounts), which is honestly not what I expected to think. I really want to A/B an M3 converted wagon without all the bracing back to back with mine now to feel the cumulative change.
Given that the fit went well enough, I went ahead and ordered the M10 quick release clamps. Those should arrive tomorrow, so with any luck I'll have that sorted as well. I'll also likely bond the little 3/8" pucks to the brace itself to make installation a lot less fiddly. It does slide out vertically rather nicely though, which is cool.


Leave a comment: