Still have the ACS Type 2? What are/were the specs?
Announcement
Collapse
No announcement yet.
03.5 LSB on LSB 6MT Restoration / Progress Journal
Collapse
X
-
Originally posted by SGM330 View Post
Still have them, they're not going anywhere. 19x9 et15 (+10mm spacers effectively et5) and 19x10 et25
I love the look of those wheels but damm they are heavy!
Must be very different driving the car with the ACS Type 2 vs Volk TE37!!!Last edited by Gt4; 02-17-2023, 02:27 PM.GT4 Composites
2003 BMW E46 M3 Laguna Seca Blue / LSB 6mt
2006 BMW E46 M3 Estoril blue / Black 6mt
2024 Toyota Land Cruiser Black
Comment
-
Originally posted by Gt4 View Post
Ok front have agressive offset! I had a set before but they had smaller lips up front
I love the look of those wheels but damm they are heavy!
Must be very different driving the car with the ACS Type 2 vs Volk TE37!!!
The car is a completely different car with the TE's. Can't wait to feel how it drives after some power mods.
- Likes 1
Comment
-
Updates!
One of my biggest mods to date - Recaros Sportsters!!
Due to the fact that I have a colored interior, I didn't want to lose that while going with an upgraded seat. So I decided to go with AMX Performance, LSB matched Sportsters. Since I like my build to be OEM+, I wanted to keep a few key features.
This includes, keeping an occupancy sensor so I don't need to code out my airbag, Brey Krause seat mounts to have the appropriate height and retain power adjustment and lastly, retaining heated seats option while utilizing the factory heated seat button. I wanted the seats to look like they came from the factory, for the most part and I didn't want any buttons in my car that aren't functional.
Haven't had much seat time since install but I love them so far!
- Likes 7
Comment
-
Originally posted by SGM330 View PostUpdates!
One of my biggest mods to date - Recaros Sportsters!!
Due to the fact that I have a colored interior, I didn't want to lose that while going with an upgraded seat. So I decided to go with AMX Performance, LSB matched Sportsters. Since I like my build to be OEM+, I wanted to keep a few key features.
This includes, keeping an occupancy sensor so I don't need to code out my airbag, Brey Krause seat mounts to have the appropriate height and retain power adjustment and lastly, retaining heated seats option while utilizing the factory heated seat button. I wanted the seats to look like they came from the factory, for the most part and I didn't want any buttons in my car that aren't functional.
Haven't had much seat time since install but I love them so far!
Also, if you’re interested in sitting a bit lower, it is possible with custom brackets for under $100 https://nam3forum.com/forums/forum/m...706#post200706‘02 332iT / 6 | ‘70 Jaguar XJ6 electric conversion
Comment
-
Originally posted by Bry5on View Post
Looks great! Do all three heated seat levels work correctly for both seats? I’ve had a lot of trouble dialing mine in (Also AMX). Passenger seat worked right out of the box, but the driver seat took a lot of software hacking in the switching center and really only works for one setting even after hacking.
Also, if you’re interested in sitting a bit lower, it is possible with custom brackets for under $100 https://nam3forum.com/forums/forum/m...706#post200706
- Likes 1
Comment
-
Originally posted by SGM330 View Post
Thank you! I actually tried to have a shop use the link to your base but they couldn't figure it out for some reason. I finally got some seat time last night and I think you might be right, doesn't seem like the heated seat levels work. I'm going to give it another try when I drive it next!
Good luck!‘02 332iT / 6 | ‘70 Jaguar XJ6 electric conversion
Comment
-
Originally posted by Bry5on View Post
Definitely let AMX know they’re not working right. That’s now two data points and you’re the only other person I’ve spoken to that’s gone the heated seat route. They know about mine already.
Good luck!
Comment
-
Originally posted by SGM330 View PostUpdates!
One of my biggest mods to date - Recaros Sportsters!!
Due to the fact that I have a colored interior, I didn't want to lose that while going with an upgraded seat. So I decided to go with AMX Performance, LSB matched Sportsters. Since I like my build to be OEM+, I wanted to keep a few key features.
This includes, keeping an occupancy sensor so I don't need to code out my airbag, Brey Krause seat mounts to have the appropriate height and retain power adjustment and lastly, retaining heated seats option while utilizing the factory heated seat button. I wanted the seats to look like they came from the factory, for the most part and I didn't want any buttons in my car that aren't functional.
Haven't had much seat time since install but I love them so far!
- Likes 1
Comment
Comment