Getting Started with NCS Expert

[Ramps]

Ok...so I went online in search of NCS profiles, I grabbed a few and copied them into the PFL folder, when I load NCS I now have this. I Also got a bit further in and received a "VIN is faulty" message, I am LOST..

What did you do to fix it? I am getting the same ‘vin is faulty’ message and i have my cable plugged in and ignition on. My cable works fine, it’s been used for ECUWORX coding and Hassan’s remote tune. I just can’t get NCS Expert to work.

[Slideways]

Sorry for newb question - there is no profile link in the sticky. Will this one work? I found it and added to the folder - Revtor's NCS Expert Profile

Yes

[BlueBimmers]

Sorry for newb question - there is no profile link in the sticky. Will this one work? I found it and added to the folder - Revtor's NCS Expert Profile

[Kdubski]

Obioban's link is down...

"The current address is suspected of downloading files and has been automatically banned by the system. If it is a false alarm, please contact customer service!"

[Mr.wReckless]

Gonna post this link here, if it is a repost then mods can feel free to delete:

https://ncs-expert.com/wp-content/uploads/2013/06/FSW_PSW.pdf

Regards

[LSB4Me]

Super helpful. Never know when you’ll need NCS.

[Dash1]

https://nam3forum.com/forums/forum/s...blink-and-more

Thank you

[heinzboehmer]

Does anyone know if you can update the LCM to support the triple blink turn signal?

https://nam3forum.com/forums/forum/s...blink-and-more

[Dash1]

Does anyone know if you can update the LCM to support the triple blink turn signal?

[heinzboehmer]

Getting somewhere, I did not have the car plugged in on my previous posts...the last 7 digits match my VIN.
Stopping here before I do anything wrong, taking a big step back and need to do some research.

Looks like everything is set up. You should be able to follow the rest of the guide now. Basic process is click process ecu, choose the module you want, read, use ncsdummy to edit, and write back to module.

[Cubieman]

Getting somewhere, I did not have the car plugged in on my previous posts...the last 7 digits match my VIN.
Stopping here before I do anything wrong, taking a big step back and need to do some research.

[Cubieman]

Ok...so I went online in search of NCS profiles, I grabbed a few and copied them into the PFL folder, when I load NCS I now have this. I Also got a bit further in and received a "VIN is faulty" message, I am LOST..

[Cubieman]

Hey terra , I downloaded and installed the software from bimmergeeks, INPA works and I can read codes etc. but I can't seem to load NCS properly, the profile you use is not attached. Here is a screenshot of my C:>NCSEXPER>PFL folder

And here is a screenshot of what happens when I choose File>Load Profile within NCS. I am just not getting this.

[E46 Adam]

Awesome!

Can you confirm which position is which? There are no markings on the switch. I'm guessing left is off and right is bridged?

Hey, i have your insta so i'll just show you how, expect from me in a hour or so!

[Tbonem3]

Awesome!

Can you confirm which position is which? There are no markings on the switch. I'm guessing left is off and right is bridged?