What year or which MSS54hp supports oil pressure via canbus?

[nextelbuddy]

In the cluster with coding index 24 ie latest variant...In NCS expert you can set oil pressure via can bus active...by default it's not active.


I remember few years ago I tried this with my ZHP swapped S54 car and mss54 HP DME with my 2002 build S54 and it didn't work.

I ended up having to run a wire from x60004 pin 11 to pin 14 on the cluster and change my cluster coding back to oil pressure via CAN bus not active.

I know alternator and oil level via canbus works just not pressure.

[ZiMMie]

Via CAMBUS = NONE 🤣

Via CANBUS = None on any MSS54HP. Its all an analog output to the cluster.

Can Msges for Oil pressure started from MSS70(S54 only)

Now on the e46 LCI equipped N46 (316/318) uses the cluster as a CAN gateway to send Oil pressure to DME ME9.2.

Which is what you are seeing on index 24.

Very easy to check. Set VO to #EY31 and code the cluster.

[nextelbuddy]

Via CAMBUS = NONE 🤣

Via CANBUS = None on any MSS54HP. Its all an analog output to the cluster.

Can Msges for Oil pressure started from MSS70(S54 only)

Now on the e46 LCI equipped N46 (316/318) uses the cluster as a CAN gateway to send Oil pressure to DME ME9.2.

Which is what you are seeing on index 24.

Very easy to check. Set VO to #EY31 and code the cluster.

Lol thanks, I fixed that. It was late when I posted 😁

And that totally makes sense. Thanks for the explanation