Does anyone have an elegant solution for windshield defrosting using a heater blower fan and the stock vents? Race car has removed heater core and hvac but still have the blower motor cable I can use. Do not want to use the BW electric defrost kit, the lines on the windshield annoy me.
Announcement
Collapse
No announcement yet.
Windshield Defrosting
Collapse
X
-
I am also pursuing this mission. Recently purchased this:
Not really "elegant." Shipping package states 2.4 lbs., so it is light. I am thinking remove when weather is good.
Item says 800W, so ...65 amps? I believe the alternator makes 130 amps, so doable? The wires feeding it are 3mm diameter (copper part). I tested it with a spare car battery. Blows good CFM, very good heat. But after about 60 seconds the wires started to smoke and insulation started to melt.
I think the wires are undersized. Next step is open unit and rewire. 8 gauge?
My IHKA is still in place. Don't want to remove until I have a defrost solution. I was thankful to have defrost on my last rainy track day.
I have been studying Bentley looking for a 65 amp source. The unused fuse slot 103 is listed at 80 amp.Where exactly is the blower motor cable? Bentley says that is a 40 amp circuit.
Comment
-
Originally posted by bigjae46 View PostAssuming your car has no windows...why is defrosting an issue?
Comment
Comment