Announcement

Collapse
No announcement yet.

M3 S54 Cooling System Hi-Temp O-ring Kits!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    M3 S54 Cooling System Hi-Temp O-ring Kits!

    Complete set of Hi-Temp Silicone and Viton O-rings for the Entire S54 Cooling System. Also comes with the Power Steering, SMG Reservoir and Expansion Tank Cap O-ring's!

    Replace the factory Buna orings with higher quality Hi-temp Silicone and Viton O-rings. These O-rings have higher temperature rating and more resistant to compression set.

    Click image for larger version  Name:	IMG_E0979.jpg Views:	0 Size:	107.1 KB ID:	59396
    Click image for larger version  Name:	IMG_7007.jpg Views:	0 Size:	263.4 KB ID:	216231
    1- Temp Sensor- 1
    2- Bleeder Screw- 1
    3- Exp Tank Return Line- 1
    4- Water Pump Lines- 2
    5- Exp Tank Cap- 2
    6- Exp Tank & Heater Core Hoses- 5
    7- Radiator Hose Fittings- 2
    8- Water Pump Pipe to Block- 2
    9- Power Steering/SMG Caps- 2
    10- Water Pump Tstat Housing- 1

    Kit includes 2 squeeze tubes of Super Lube and 19 O-rings.


    19 O-rings and Lube for $50.00. Shipped via Priority 3 Day.
    Please send funds via PayPal as a gift or add $1.50 to cover the Fee to
    Mrdestny@yahoo.com.


    Also available on eBay, I have 100% Feedback so buy with confidence!

    http://www.ebay.com/itm/296039030332?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=CjtdUZn2QzS&sssrc=2047675&ssuid=CjtdUZn2 Qz S&widget_ver=artemis&media=COPY




    ----------------------------------------------------------------------------------------------------------------------------------------------------------

    Viton is a synthetic rubber and fluoropolymer elastomer that is used in O-rings and other molded or extruded products. It offers the best fluid resistance of any commercial rubber. At high temperatures, Viton retains good mechanical properties compared to other elastomers. It remains substantially elastic and is resistant to oils and chemicals at elevated temperatures.

    With its low permeability to a broad range of substances, Viton resists degradation from a wider variety of chemicals and fluids such as fuels, lubricants and most mineral acids. Other mechanical properties include good resistance to compression, resistance to atmospheric oxidation, sun, climatic conditions, even fungus and mold. Viton displays good electrical properties, too, in low voltage, low-frequency applications.

    As a sealing option, the crucial difference between Buna and Viton is the temperature range the materials function in. Viton is the choice over Buna for high-temperature applications. Viton seals hold indefinitely at temperatures up to 400°F and can last up to 48 hours at temperatures up to 600°F. Buna is effective to 250°F.


    Hi-Temp Silicone O-rings are excellent seal materials for static, high temperature applications. Featuring outstanding flex and fatigue life, ozone and UV radiation resistance, physiologically neutral and insulating properties with a temperature range as low as -70 and up to 450 degrees fahrenheit.


    Super Lube Info:
    https://www.super-lube.com/Content/I...ose_Grease.pdf

    Super Lube® Grease is a patented synthetic heavy-duty, multi-purpose lubricant with Syncolon® (PTFE). Synthetic base fluids and the addition of Syncolon® (PTFE) micro powders combine to form a premium lubricant that provides longer life protection against friction, wear, rust and corrosion. Machinery lasts longer, downtime is reduced and productivity is increased.

    Super Lube® Grease is a NSF registered Food Grade lubricant, rated H1 for incidental food contact. Meets former USDA (H1) guidelines.

    Super Lube® Grease offers good mechanical stability, does not evaporate or form gummy deposits. It will not melt or separate. There is no Silicone in Super Lube® Multi-Purpose Grease with Syncolon® (PTFE).
    Click image for larger version  Name:	92fe4890b685949fcbdc61326ab3e10c.jpg Views:	0 Size:	68.9 KB ID:	216234
    Click image for larger version Name:	IMG_6824.JPG Views:	0 Size:	183.7 KB ID:	59391 Click image for larger version Name:	IMG_5605.jpg Views:	0 Size:	26.8 KB ID:	59389 Click image for larger version Name:	379933_x800.jpg Views:	0 Size:	28.1 KB ID:	59388 Click image for larger version Name:	379939_x800.jpg Views:	0 Size:	18.9 KB ID:	59390
    Click image for larger version  Name:	IMG_E0026.jpg Views:	0 Size:	183.5 KB ID:	216232 Click image for larger version  Name:	IMG_0869.jpg Views:	0 Size:	176.8 KB ID:	216233

    Click image for larger version  Name:	IMG_E0846.jpg Views:	0 Size:	78.1 KB ID:	216235




    Last edited by WOLFN8TR; 05-19-2024, 09:35 PM.
    TTFS Engine/SMG Tune - CSL 255 - SGT Headers/Sect 1/SCZA
    Brembo 996 - ARC-8's - BWS 500S 9k/11k - Valentine 1 - BlueBus - Orion V4's
    Evolve Eventuri
    - VIS XTS CF Hood - CF Lip/Console/Diffuser/CSL Trunk

    #2
    Bump...
    TTFS Engine/SMG Tune - CSL 255 - SGT Headers/Sect 1/SCZA
    Brembo 996 - ARC-8's - BWS 500S 9k/11k - Valentine 1 - BlueBus - Orion V4's
    Evolve Eventuri
    - VIS XTS CF Hood - CF Lip/Console/Diffuser/CSL Trunk

    Comment


      #3
      Got mine for future cooling flush! Good to have since OEM cooling hoses from CRP (Rein) have, reportedly, weak orings.
      DD: /// 2011.5 Jerez/bamboo E90 M3 · DCT · Slicktop · Instagram
      /// 2004 Silvergrey M3 · Coupe · 6spd · Slicktop · zero options
      More info: https://nam3forum.com/forums/forum/m...os-supersprint

      Comment


        #4
        Could bad O-rings be a cause for Coolant Leak? Have a leak coming from somewhere. Removed the Radiator to see if that was the culprit. If so, I will be interested in these for sure. Thanks in advance.

        Comment


          #5
          Originally posted by trudriv3r View Post
          Could bad O-rings be a cause for Coolant Leak? Have a leak coming from somewhere. Removed the Radiator to see if that was the culprit. If so, I will be interested in these for sure. Thanks in advance.
          It could be yes.

          I replaced my water pump and orings I bought from ECS. They sent two different sized orings for the small water pump pipes which caused it to slightly leak coolant when the car was off. It caused the system to suck air when running which caused over pressurization. I originally thought I had a blown head gasket, luckily it was just a undersized oring which in turn led me to putting this Hi-Temp Oring kit together.
          TTFS Engine/SMG Tune - CSL 255 - SGT Headers/Sect 1/SCZA
          Brembo 996 - ARC-8's - BWS 500S 9k/11k - Valentine 1 - BlueBus - Orion V4's
          Evolve Eventuri
          - VIS XTS CF Hood - CF Lip/Console/Diffuser/CSL Trunk

          Comment


            #6
            Bump...
            TTFS Engine/SMG Tune - CSL 255 - SGT Headers/Sect 1/SCZA
            Brembo 996 - ARC-8's - BWS 500S 9k/11k - Valentine 1 - BlueBus - Orion V4's
            Evolve Eventuri
            - VIS XTS CF Hood - CF Lip/Console/Diffuser/CSL Trunk

            Comment


              #7
              Bump...
              TTFS Engine/SMG Tune - CSL 255 - SGT Headers/Sect 1/SCZA
              Brembo 996 - ARC-8's - BWS 500S 9k/11k - Valentine 1 - BlueBus - Orion V4's
              Evolve Eventuri
              - VIS XTS CF Hood - CF Lip/Console/Diffuser/CSL Trunk

              Comment


                #8
                Bump...
                TTFS Engine/SMG Tune - CSL 255 - SGT Headers/Sect 1/SCZA
                Brembo 996 - ARC-8's - BWS 500S 9k/11k - Valentine 1 - BlueBus - Orion V4's
                Evolve Eventuri
                - VIS XTS CF Hood - CF Lip/Console/Diffuser/CSL Trunk

                Comment


                  #9
                  Time to do the Cooling System! Hi-Temp Silicone and Viton O-rings.

                  Last edited by WOLFN8TR; 10-01-2020, 12:37 AM.
                  TTFS Engine/SMG Tune - CSL 255 - SGT Headers/Sect 1/SCZA
                  Brembo 996 - ARC-8's - BWS 500S 9k/11k - Valentine 1 - BlueBus - Orion V4's
                  Evolve Eventuri
                  - VIS XTS CF Hood - CF Lip/Console/Diffuser/CSL Trunk

                  Comment


                    #10
                    Bump...
                    TTFS Engine/SMG Tune - CSL 255 - SGT Headers/Sect 1/SCZA
                    Brembo 996 - ARC-8's - BWS 500S 9k/11k - Valentine 1 - BlueBus - Orion V4's
                    Evolve Eventuri
                    - VIS XTS CF Hood - CF Lip/Console/Diffuser/CSL Trunk

                    Comment


                      #11
                      Do any of the ones you have fit the hose that goes from the heater core to the engine? I have a leak there

                      Comment


                        #12
                        I was working on adding those to the kit. I have two different sizes I can send you for Free if you provide some feedback on fitment. PM me...
                        TTFS Engine/SMG Tune - CSL 255 - SGT Headers/Sect 1/SCZA
                        Brembo 996 - ARC-8's - BWS 500S 9k/11k - Valentine 1 - BlueBus - Orion V4's
                        Evolve Eventuri
                        - VIS XTS CF Hood - CF Lip/Console/Diffuser/CSL Trunk

                        Comment


                          #13
                          Complete set of Hi-Temp Silicone and Viton O-rings for the Entire S54 Cooling System. Also comes with the Power Steering, SMG Reservoir and Expansion Tank Cap O-ring's!

                          Replace the factory Buna orings with higher quality Hi-temp Silicone and Viton O-rings. These O-rings have higher temperature rating and more resistant to compression set.

                          Click image for larger version  Name:	IMG_E0979.jpg Views:	126 Size:	107.1 KB ID:	59396




                          1- Temp Sensor- 1
                          2- Bleeder Screw- 1
                          3- Exp Tank Return Line- 1
                          4- Water Pump Lines- 2
                          5- Exp Tank Cap- 2
                          6- Exp Tank & Heater Core Hoses- 5
                          7- Radiator Hose Fittings- 2
                          8- Water Pump Pipe to Block- 2
                          9- Power Steering/SMG Caps- 2
                          10- Water Pump Tstat Housing- 1
                          Kit includes 2 squeeze tubes of Super Lube and 19 O-rings.


                          19 O-rings and Lube for $48 Shipped via Priority 3 Day.
                          Please send funds via PayPal as a gift or add $1.50 to cover the Fee to Mrdestny@yahoo.com


                          Now available for Sale on eBay! I have 100% Feedback so buy with confidence.
                          BMW-E46-M3-S54-Hi-Temp-Cooling-System-O-Ring-Kits-and-More!



                          Viton is a synthetic rubber and fluoropolymer elastomer that is used in O-rings and other molded or extruded products. It offers the best fluid resistance of any commercial rubber. At high temperatures, Viton retains good mechanical properties compared to other elastomers. It remains substantially elastic and is resistant to oils and chemicals at elevated temperatures.

                          With its low permeability to a broad range of substances, Viton resists degradation from a wider variety of chemicals and fluids such as fuels, lubricants and most mineral acids. Other mechanical properties include good resistance to compression, resistance to atmospheric oxidation, sun, climatic conditions, even fungus and mold. Viton displays good electrical properties, too, in low voltage, low-frequency applications.

                          As a sealing option, the crucial difference between Buna and Viton is the temperature range the materials function in. Viton is the choice over Buna for high-temperature applications. Viton seals hold indefinitely at temperatures up to 400°F and can last up to 48 hours at temperatures up to 600°F. Buna is effective to 250°F. However, it can effectively seal mechanical objects at low temperatures to –22°F. Viton seals are rendered ineffective at temperatures below -5°F, with the material becoming hard and inflexible.


                          Hi-Temp Silicone O-rings are excellent seal materials for static, high temperature applications. Featuring outstanding flex and fatigue life, ozone and UV radiation resistance, physiologically neutral and insulating properties with a temperature range as low as -70 and up to 450 degrees fahrenheit.


                          Super Lube Info:
                          https://www.super-lube.com/Content/I...ose_Grease.pdf

                          Super Lube® Grease is a patented synthetic heavy-duty, multi-purpose lubricant with Syncolon® (PTFE). Synthetic base fluids and the addition of Syncolon® (PTFE) micro powders combine to form a premium lubricant that provides longer life protection against friction, wear, rust and corrosion. Machinery lasts longer, downtime is reduced and productivity is increased.

                          Super Lube® Grease is a NSF registered Food Grade lubricant, rated H1 for incidental food contact. Meets former USDA (H1) guidelines.

                          Super Lube® Grease offers good mechanical stability, does not evaporate or form gummy deposits. It will not melt or separate. There is no Silicone in Super Lube® Multi-Purpose Grease with Syncolon® (PTFE).
                          Click image for larger version  Name:	IMG_6824.JPG Views:	0 Size:	183.7 KB ID:	59391 Click image for larger version  Name:	IMG_5605.jpg Views:	0 Size:	26.8 KB ID:	59389 Click image for larger version  Name:	379933_x800.jpg Views:	0 Size:	28.1 KB ID:	59388 Click image for larger version  Name:	379939_x800.jpg Views:	0 Size:	18.9 KB ID:	59390









                          ------------------------------------------------------- "OLD KIT" -------------------------------------------------------------

                          1- Temp Sensor- 1
                          2- Bleeder Screw- 1
                          3- Exp Tank Return Line- 1
                          4- Water Pump Lines- 2
                          5- Exp Tank Cap- 2
                          6- Radiator Hose Fittings- 2
                          7- Water Pump Pipe to Block- 2
                          8- Power Steering/SMG Caps- 2
                          9- Water Pump Tstat Housing- 1

                          Last edited by WOLFN8TR; 02-05-2021, 02:43 PM.
                          TTFS Engine/SMG Tune - CSL 255 - SGT Headers/Sect 1/SCZA
                          Brembo 996 - ARC-8's - BWS 500S 9k/11k - Valentine 1 - BlueBus - Orion V4's
                          Evolve Eventuri
                          - VIS XTS CF Hood - CF Lip/Console/Diffuser/CSL Trunk

                          Comment


                            #14
                            count me in for a set!
                            [AW / Cinnamon / 6MT] /// [build journal]

                            Comment


                              #15
                              Bump...
                              TTFS Engine/SMG Tune - CSL 255 - SGT Headers/Sect 1/SCZA
                              Brembo 996 - ARC-8's - BWS 500S 9k/11k - Valentine 1 - BlueBus - Orion V4's
                              Evolve Eventuri
                              - VIS XTS CF Hood - CF Lip/Console/Diffuser/CSL Trunk

                              Comment

                              Working...
                              X