TC Kline Camber Plates

[02_lsb]

Years ago I had my TCK DAs installed, I got different wheels and I want to reduce the amount of negative camber down to 0.

I took off the strut brace and it appears that some bolts are obstructed by the tower cutout.

Is there a DIY out there how to adjust the front camber plates?

[bigjae46]

Why zero camber? You'd be better off going with zero toe if you're trying to save tires.

I doubt you'll be able to get to zero camber.

[T.J.]

May end up with outer shoulder wear with 0 camber

[02_lsb]

Ok. There was a TCK adjustment DIY on the old forums. I can’t find anything. Does anyone still have it by chance?

[bigjae46]

Ok. There was a TCK adjustment DIY on the old forums. I can’t find anything. Does anyone still have it by chance?

Jack up the wheel, loosen the 3 nuts on strut tower and then move the strut in for more negative camber.


Sent from my iPhone using Tapatalk

[02_lsb]

Easy enough. Thanks.