Suspension settings question - Picture request BBS RC or Arc-8's

[Singh]

18x10 et25 rear
18x8.5 et38 front
no spacers
stock alignment
dinan springs

Awesome 👏🏼


Sent from my iPhone using Tapatalk

[Slideways]

Unless the small wear indicator arrow on the outer tread block is being scrubbed away, probably best to stick to stock alignment.

[Singh]

Unless the small wear indicator arrow on the outer tread block is being scrubbed away, probably best to stick to stock alignment.

Cool, thank. Are the numbers I found on the build journals website accurate for stock alignment?




Sent from my iPhone using Tapatalk

[Slideways]

Cool, thank. Are the numbers I found on the build journals website accurate for stock alignment?




Sent from my iPhone using Tapatalk

It is somewhat correct. Here is the factory alignment -

[FBloggs]

My brief is different to yours.
Daily driver.
slight lowering.
Square set up for front bite.
square set up for rotation road hazards, etc.
Even tire wear.
18x9.5 et 22. 12mm rear spacer.
265 35 18
1.4 neg 0 toe front. So poke looks a titch silly.
1.7 neg slight toe in. In the rear for the wet.

[Ragincajun5220]

Yet to be aligned since Ohlins slapped on yesterday, but here is my setup.

ohlins rt
apex arc 8 18x9/10, no spacers
245/40, 275/35

[Nate047]

18x10 et25 rear
18x8.5 et38 front
no spacers
stock alignment
dinan springs

More please. This looks so good.