712 steering rack question

[And1m3]

Hi guys
Does anyone know 100% if you need to code the dsc module ???after install 712 rack on left highway curves dsc cut throttle and only at left turns ...i try on right curve same km nothing....anybody can help?

Sent from my LM-G900 using Tapatalk

[Cubieman]

Fwiw

https://nam3forum.com/forums/forum/special-interests/coding-tuning/110515-zhp-rack-coding

[And1m3]

Thanks alot

Sent from my LM-G900 using Tapatalk

[old///MFanatic]

You should code it for ZCP/CSL rack settings.

Interesting yours only triggers intrusively on left curves. Makes me wonder if you truly centered the rack’s center notch located at top of dust cover.

[And1m3]

You should code it for ZCP/CSL rack settings.

Interesting yours only triggers intrusively on left curves. Makes me wonder if you truly centered the rack’s center notch located at top of dust cover.

I check everything...i even swap axles to be sure is not the ring....just left the coding because when i swap it 3 people told me you don't need to code it

Sent from my LM-G900 using Tapatalk

[old///MFanatic]

I check everything...i even swap axles to be sure is not the ring....just left the coding because when i swap it 3 people told me you don't need to code it

Well..now what do you think about those 3 people compared to the ones who said you should??

It’s just follows logic that the steering angle sensor will be reading improperly for what is going on and triggering.