Announcement

Collapse
No announcement yet.

Front Main Seal Installation (DIY?)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    If the FMS was leaking wouldn't it fling oil out wards?

    Comment


      #17
      Originally posted by cobra View Post
      If the FMS was leaking wouldn't it fling oil out wards?
      There was a small spray pattern on the driver's side frame rail and below the A/C compressor. On a friends car, the spray pattern was all across the under tray. I'm pretty sure it is the FMS, but it would suck if it is something easier like the OFH gasket.

      Comment


        #18
        Originally posted by Slideways View Post

        There was a small spray pattern on the driver's side frame rail and below the A/C compressor. On a friends car, the spray pattern was all across the under tray. I'm pretty sure it is the FMS, but it would suck if it is something easier like the OFH gasket.
        Mine only did the under tray thing at the very end. Seal was really leaking at that point.

        My engine was WAY more grimey than yours. I bet you just caught yours sooner.
        2002 Topasblau M3 - Coupe - 6MT - Karbonius CSL Airbox - MSS54HP Conversion - SSV1 - HJS - Mullet Tune - MK60 Swap - ZCP Rack - Nogaros - AutoSolutions - 996 Brembos - Slon - CMP - VinceBar - Koni - Eibach - BlueBus - Journal

        2012 Alpinweiss 128i - Coupe - 6AT - Slicktop - Manual Seats - Daily - Journal

        Comment

        Working...
        X