What methods have you used to remove the warning label from the Sun Visor?
Announcement
Collapse
No announcement yet.
Removing warning label from Sun Visor
Collapse
X
-
I soaked a shop towel in isopropyl alcohol and let it sit on top of the label for five minutes or so. Make sure you press it up against the label well. Pretty easy to pull off after that2002 Topasblau M3 - Coupe - 6MT - Karbonius CSL Airbox - MSS54HP Conversion - Kassel MAP - SSV1 - HJS - PCS Tune - Beisan - MK60 Swap - ZCP Rack - Nogaros - AutoSolutions - 996 Brembos - Slon - CMP - VinceBar - Koni - Eibach - BlueBus - Journal
2012 Alpinweiss 128i - Coupe - 6AT - Slicktop - Manual Seats - Daily - Journal
- Likes 2
Comment
-
I have done three E46s. I dabbed it with Goo Gone until it started to ripple, become soft and pliable (yet intact). Then gently peeled it off.Last edited by old///MFanatic; 10-10-2022, 12:54 PM.6MT SLICKTOP - OE CSL Wheels - OE CSL Brakes - CSL Rack - CSL Trunk - CSL Diffuser - AA Tune - AA Pulleys- AS 40% SSK - 4.10 Motorsport Diff - Bilstein PSS9s - H&R Swaybars - CSL Lip - Gruppe M CF Intake - Supersprint - M Track Mode
Comment
-
I'd be careful these days with this mod. The fabric is old and in most cars even well kept garaged ones, the fabric is barely hanging on and scrubbing is just going to lift the glue and you'll trade a logo for fabric sag.2003 E46 M3 TiAg/Cinnamon 6MT
2005 E46 330i ZHP Imola/Sand
| Karbonius | Schrick | Supertech | Volk | Recaro | FCM | SuperSprint | Turner | Hyperco | GC | PFC | VAC | OMP | Radium Engineering | MPRacing |
Instagram:@thegenius46m
NorCal DME Programming and Coding Expert
Comment
Comment