S54 Dyno Database

[DropTopKingM3]

everyone knows a stock S54 with tune is not making anywhere near 350rwhp legit

The owner is posting it on Instagram as WHP gains. That’s what made me wonder.

[digger]

Kassel has a Mustang dyno that normally reads about 3-5% lower than most Dynojets...assuming that nothing was changed for that particular run.

I’m waiting to hear from someone, but I’m calling BS on this until I can confirm-lol

everyone knows a stock S54 with tune is not making anywhere near 350rwhp legit

[stash1]

I saw a preview for this video on instagram. Im no dyno expert by any means so please forgive me in advance. Does Kassels dyno measure in wheel horsepower or crank?

Kassel has a Mustang dyno that normally reads about 3-5% lower than most Dynojets...assuming that nothing was changed for that particular run.

I’m waiting to hear from someone, but I’m calling BS on this until I can confirm-lol

[DropTopKingM3]

I saw a preview for this video on instagram. Im no dyno expert by any means so please forgive me in advance. Does Kassels dyno measure in wheel horsepower or crank?

My E46 M3 Finally Hits The Dyno!! (Fastest Stock S54?) - YouTube

[RedM3/4]

Thanks! I've been trying to decide between the Eventuri and CSL. I know there are other factors, but this analysis and ease of install, pretty sure I'm going Eventuri.

ADS
------------------------------------------

- Euro 2004 E46 M3
- Milltek Center Section
- RM Motors Decat
- Stock Rear Box
- Eventuri with air temp bung
- AEM ECU


Then with more tweaking:



So, not quite the result I was expecting with the airbox, however I did pick up more midrange, and chunk up top along with more torque from 3.5K onwards.

Overall, it seems that the stock plenum is VERY well designed and adding CSL style air boxes don't always mean more power!

[stash1]

Stan,

- Karbonius box
- Intake and exhaust performance camshafts
- DynaMite is the Dyno I used which shows exact as the Dyno-Jet I use all of the time.
I have done/tuned at least 15+ set ups at this specific DynaMite and next day at Jery's Dyno-Jet
to check and the difference is 2-3hp which is subject to weather temps, air density from the night before
and next day morning etc.I have over $2k in renting dyno time, tuning and comparing Dynos
with same car, my preferred dyno is Dyno-Jet and why I tune on the DynaMite and next
day I am Dyno-Jet.
- Headers are modified
- I forgot to mention I have 52m ITB's which ehhh...

HP ECU converted to 1 Bar MAP/TPS which is what is used on CSL-S54 and very common on
other engines.

Stan brother, I worked hard to get this number....

I have another S54 engine on the Stand and I told my other customer I just need little money
and I am confident a hair under 360rwhp on 91 Cali gas Dyno-Jet number.

See, not everything is HP, my target is to push the TQ hi as well...the ingredients must be proper
otherwise the results are not there.

Regards,
Anri

Hey Anri, yeah, I was wondering what happened to you there for a couple of wks, and now I know...you’ve been chained to that dyno all this time-lol. Curves look great brother, and again, very nice results on piss water! Which cams did you go with, and what’s the entire exhaust look like?

[Anri]

Who did your tune?

Hi,

I work with a local tuner and we did the tune together.

Regards,
Anri

[duracellttu]

Stan,

- Karbonius box
- Intake and exhaust performance camshafts
- DynaMite is the Dyno I used which shows exact as the Dyno-Jet I use all of the time.
I have done/tuned at least 15+ set ups at this specific DynaMite and next day at Jery's Dyno-Jet
to check and the difference is 2-3hp which is subject to weather temps, air density from the night before
and next day morning etc.I have over $2k in renting dyno time, tuning and comparing Dynos
with same car, my preferred dyno is Dyno-Jet and why I tune on the DynaMite and next
day I am Dyno-Jet.
- Headers are modified
- I forgot to mention I have 52m ITB's which ehhh...

HP ECU converted to 1 Bar MAP/TPS which is what is used on CSL-S54 and very common on
other engines.

Stan brother, I worked hard to get this number....

I have another S54 engine on the Stand and I told my other customer I just need little money
and I am confident a hair under 360rwhp on 91 Cali gas Dyno-Jet number.

See, not everything is HP, my target is to push the TQ hi as well...the ingredients must be proper
otherwise the results are not there.

Regards,
Anri

Who did your tune?

[Anri]

Hey Anri, very nice results for a budget build! Is this on a DJ? Sooo, no cams? Which airbox is that?

Stan,

- Karbonius box
- Intake and exhaust performance camshafts
- DynaMite is the Dyno I used which shows exact as the Dyno-Jet I use all of the time.
I have done/tuned at least 15+ set ups at this specific DynaMite and next day at Jery's Dyno-Jet
to check and the difference is 2-3hp which is subject to weather temps, air density from the night before
and next day morning etc.I have over $2k in renting dyno time, tuning and comparing Dynos
with same car, my preferred dyno is Dyno-Jet and why I tune on the DynaMite and next
day I am Dyno-Jet.
- Headers are modified
- I forgot to mention I have 52m ITB's which ehhh...

HP ECU converted to 1 Bar MAP/TPS which is what is used on CSL-S54 and very common on
other engines.

Stan brother, I worked hard to get this number....

I have another S54 engine on the Stand and I told my other customer I just need little money
and I am confident a hair under 360rwhp on 91 Cali gas Dyno-Jet number.

See, not everything is HP, my target is to push the TQ hi as well...the ingredients must be proper
otherwise the results are not there.

Regards,
Anri

[digger]

Hey Anri, very nice results for a budget build! Is this on a DJ? Sooo, no cams? Which airbox is that?

Land and Sea

[stash1]

Hey Anri, very nice results for a budget build! Is this on a DJ? Sooo, no cams? Which airbox is that?

[Anri]

Stash,

I know its not an E46M3 but please allow me to share what I achieved
with the S54 Love.

- Intake and Exhaust camshafts.
- CSL Box
- "Budget" headers they are not really equal length....(measured them)
- Crappy California 91 Octane gas.

My concentration on the power was to dial the Mid-Range torque were we
need the "kick"

The camshaft timing brought the pick hp around 7650-ish so that it comes
little earlier and keeps it flat to about 8150rpm and rev limiter is 8200+/- rpm.

There is another 5rwhp with little tweak but no need to push the ticket on
91 Cali gas..

Chilled passes like 3-4mins between runs
353.8 rwhp
265.1 rwtq

Hot passes one after each other.
348.5 rwhp.
259.1 rwtq

Regards,
Anri

https://www.youtube.com/watch?v=t_W05pmpvkI

[Slideways]

Evolve has been responsive but the tune is a PIA. Always new versions of the tuner software and the biggest is I can’t hook up to ISTA because the tune is locked or something.

Yeah, planning on going with Paul.


Sent from my iPhone using Tapatalk

Ya, sometimes it's worth taking the loss and moving on. Similar situation to those that had TTFS.

[bigjae46]

Jae, lose the current Evolve tune, get an airbox and contact Paul

Evolve has been responsive but the tune is a PIA. Always new versions of the tuner software and the biggest is I can’t hook up to ISTA because the tune is locked or something.

Yeah, planning on going with Paul.


Sent from my iPhone using Tapatalk

[Slideways]

Figured as much because of the headers.


Sent from my iPhone using Tapatalk

Jae, lose the current Evolve tune, get an airbox and contact Paul