Whats a good low range torque wrench?

[ac427]

Norbar SL0

[M3_mann]

Got me a craftsman wrenches and they’re fantastic

[Nate047]

Related: what's the move for calibrating torque wrenches? I would tend to say I don't want to do it myself

[bavarian3]

Related: what's the move for calibrating torque wrenches? I would tend to say I don't want to do it myself

Ship to Team Torque.

[bullet0770]

I am looking at snap-on 3/8 - 15-125 (ATECH2F125BV), used one time for $340. Good Price ?

[bigjae46]

Seems within range for used torque wrenches

[Estoril]

Related: what's the move for calibrating torque wrenches? I would tend to say I don't want to do it myself

There are calibration shops that do just that. I have mine done every 12-18 months.

[bullet0770]

Seems within range for used torque wrenches

Thanks, will get one for future engine work I have planned (Vanos, Shims, rod bearing etc.).

[bigjae46]

There are calibration shops that do just that. I have mine done every 12-18 months.

For Snap On, you can ship to their service center. I think it was $100 plus parts. Probably want a new end cap for the battery. The spring goes bad and then the torque wrench will turn on and off all of the time. Super annoying.

[prostcfc]

CDI; Snap-on company, internet claims it's basically the same as their click-style. I have three that hits mostly everything I would generally need to torque.

[bigjae46]

CDI; Snap-on company, internet claims it's basically the same as their click-style. I have three that hits mostly everything I would generally need to torque.

Most torque wrenches are made by the same manufacturer, just rebranded under many different names.

[eacmen]

I have 3 CDI torque wrenches. So far havent let me down. I got them calibrated once. If I ever do some head or bottom end work l will get them calibrated again.

One thing I wish I had though was the angle measurement. I just have the normal click style.

[bigjae46]

I have 3 CDI torque wrenches. So far havent let me down. I got them calibrated once. If I ever do some head or bottom end work l will get them calibrated again.

One thing I wish I had though was the angle measurement. I just have the normal click style.

I prefer the click style for everyday stuff but the digital ones are nice for those angle torques...soooo much easier.

[eacmen]

I prefer the click style for everyday stuff but the digital ones are nice for those angle torques...soooo much easier.

Must be nice to be rich 🤑

[bigjae46]

Must be nice to be rich 🤑

I buy used ...lol