Engine replacement... failing SMG test

[eacmen]

Hey Fellas,

Regarding the continued bleedung... do i keep bleeding the Actuator repeatedly (Test 1 thats passing) or do i bleed test 2 repeatedly (the Clutch Slave) thats failing?

Just test 2


Sent from my iPhone using Tapatalk

[x Spades x]

Hey Fellas,

Regarding the continued bleedung... do i keep bleeding the Actuator repeatedly (Test 1 thats passing) or do i bleed test 2 repeatedly (the Clutch Slave) thats failing?

[x Spades x]

Just a suggestion. What gave me fits was the little tube from the SMG reservoir was not connected tightly to the pump. Air got in, and it would not prime. Once that was fixed, it passed the SMG adaptation first time.

Thanks, ill double check that too.

[eacmen]

Just a suggestion. What gave me fits was the little tube from the SMG reservoir was not connected tightly to the pump. Air got in, and it would not prime. Once that was fixed, it passed the SMG adaptation first time.

Also this! That tube needs to be pushed into the connector on the pump harder than you might think.


Sent from my iPhone using Tapatalk

[PowerSax]

Just a suggestion. What gave me fits was the little tube from the SMG reservoir was not connected tightly to the pump. Air got in, and it would not prime. Once that was fixed, it passed the SMG adaptation first time.

[x Spades x]

I agree with the continued bleed routine. When I did the smg pump in my wife’s M3 it took 6 rounds of it to be error free. (Kept it on a charger the whole time.)

OK, ill continue the bleeding. Thank you for the input!

[Vonbimmer]

I agree with the continued bleed routine. When I did the smg pump in my wife’s M3 it took 6 rounds of it to be error free. (Kept it on a charger the whole time.)

[x Spades x]

Is the unit in its original orientation during the bleed? Or have you relocated to drug bin?

Everything is in its original location (well CSL conversion).

[oceansize]

Is the unit in its original orientation during the bleed? Or have you relocated to drug bin?

[x Spades x]

Ok... ill continue. Ive bled the actuator now for the 24th time. Lol

[eacmen]

I would say keep running the bleed procedure until it succeeds. Make sure your battery is healthy as voltage drops can cause this to fail as well.


Sent from my iPhone using Tapatalk

[x Spades x]

Can you shift the rest with INPA?

Yes, im able to shift into all gears

[Icecream]

Can you shift the rest with INPA?

[x Spades x]

Goes through all gears from Reverse to 2nd (car isnt moving so 2nd is the highest you get)

[Icecream]

Yes
gears are also changing when i shift (R-2)

As in it goes R to 2??