Door Crash Bar - Removable!

[bigjae46]

You can get it out through the opening for the wiring harness plug in the jamb. Hope this helps someone…

Thinking about making one from carbon and kevlar🤔

[Obioban]

There are many parts I would like to have in carbon. This is not one of them.

[CrookedCommie]

Does it just unbolt or is it tac welded to the door? I'm about to remove and cut up the doors for cage.

[heinzboehmer]

Why replace with a carbon piece if your car is fully caged?

[usdmej]

Does it just unbolt or is it tac welded to the door? I'm about to remove and cut up the doors for cage.

bigjae46 could you please confirm this? i could picture sliding it out of the available crevices in the door but curious how it's attached in the first place

[Gt4]

Does it just unbolt or is it tac welded to the door? I'm about to remove and cut up the doors for cage.

Just unbolt

[usdmej]

thank you! i see the holes for the bolts now, assuming the studs are built into the doors?