If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I chat with brands and suppliers every other day, even active competitors.
The antagonism that some believe exists between brands just isn't there in reality. I'll talk to him about the weather if I want, Las Vegas is really nice in November - none of which is your business to be honest.
Fly out to Vegas, I'll get you free passes if you'd like. SEMA is an experience like no other.
Ah ok thank you for the reply GB man. 🤣👍🏼
Why would you think I am dying for free SEMA passes?
Why would you think I am dying for free SEMA passes?
You're welcome!
Because SEMA is an awesome private event for the industry and passes are required with a SEMA membership and proof of relevant participation to the industry.
Even if you're being coy, I think meeting in real life always dampens the mood - we're just people.
Because SEMA is an awesome private event for the industry and passes are required with a SEMA membership and proof of relevant participation to the industry.
Cheers.
Ah ok and why would you think I could not get these passes on my own. You seem to be talking down to someone who has been on this industry much much longer than you FYI 🤣🤣🤣. Any way Good luck with SEMA.
Ah ok and why would you think I could not get these passes on my own. You seem to be talking down to someone who has been on this industry much much longer than you FYI 🤣🤣🤣. Any way Good luck with SEMA.
Been at it since '08 on my end, congrats on the further longevity.
My bad on the assumptions, it says senior member on the left. I figured anyone looking to make money here with group buys and such should be titled commercial vendors. It causes further confusion on the mobile app according to the other guy.
I only wanted to pay back the community for years of helping me out by setting up an intro offer with Vorst directly (I'll have nothing to do with it, in fact I'll be getting the same offer). I mean at least do ONE a thing for the community to show my gratitude. If I wanted to make money you dont think I would have done that years ago on the forums?
Also I have all OE CSL parts (minus front bumper) on my car so right now for me personally I would only go for an intake so I can use the OE CSL intake for decor in the shop.
You're asking me rhetorical questions for which I don't have answers. I don't know how you make your money - nor does it matter, I can see you make/have/spend a lot.
Good for you on the Genuine CSL parts, that's baller.
His Guntherwerks cars are amazing having seen them first hand. The VSCL front bumper was woven fiberglass back then. He marketed it as DVWP. It's a little different to pre-preg carbon autoclave in regards to material quality.
One thing is certain: you won't find me dissing a company with a proven track record.
I will definitely discredit opinions on a product's quality from individual with lack of hands on experience - in this case, that's you.
Anyone with any sort of sense can see what you did in that thread I linked. As always, jet_dogg has a way with brutal honesty.
The fact you're inferring Alsatek doesn't fit as well after all this is by definition being butt hurt.
You can just own up to it or triple down. No harm done.
--
Anyways, back to chatting CSL bumpers. Here's a dual hole snorkel produced this month for a member of EuroConnex. It carries a little extra as the cut outs are done afterwards - and then blended in during paint.
I don't know what's more cringe-worthy, the etymology of the name of the brand (I can't even bring myself to type it) or the fact the guy has hoodwinked a large portion of the community into believing his stuff isn't chinese basura and actually coveting it.
the fact the guy has hoodwinked a large portion of the community into believing his stuff isn't chinese basura and actually coveting it.
Originally posted by Chas3n
Entertain us OG's on what other product was as good as VCSL…
yea seriously, not sure why you have this delusion of how Vorsteiner is perceived but to me at least, they've always been the company that can reliably bring small volume products to market, that aren't a total nightmare to fit. that's why they've moved onto higher end cars, and that's probably how/why they've been successful with Gunther Werks (too many high end customers wanting a faster delivery time than what singer can offer)
Status Gruppe was dog shit, and a scum bag (Mike Migs) and all the euro scammers that have come and gone, including the CONnex, haven't shown anything in the last 2 decades.
this is always hard to hear about Mike since my only dealings with him were back when he was less well known and his high work ethic could keep up with demand. unfortunately, he couldn't stop over-promising and under-delivering when things picked up for his company, and unfortunately seems to have passed along that business ethic to whoever is running the company now. their carbon fiber products always had decent to good enough fitment though
and imo euroconnex doesn't appear to be a scam company, i just don't care to buy mostly meh products from a guy that can't stop being openly psychopathic
I don't know what's more cringe-worthy, the etymology of the name of the brand (I can't even bring myself to type it) or the fact the guy has hoodwinked a large portion of the community into believing his stuff isn't chinese basura and actually coveting it.
Originally posted by Chas3n
Entertain us OG's on what other product was as good as VCSL…
Status Gruppe was dog shit, and a scum bag (Mike Migs) and all the euro scammers that have come and gone, including the CONnex, haven't shown anything in the last 2 decades.
Cost is usually a good indicator of where it's made, along with the underside craftsmanship.
P.S.: Status Gruppe apparently discontinued their CSL bumper.
See below for a BNIB Vorsteiner V2 DWVP front bumper sold privately in 2021.
For reference, this kit apparently sold for 850 US in 2008.
Here's another used version from 2016. This was roughly 1,800 US back then according to the poster here.
The Vorsteiner splitters also appeared to be 2x2 - unlike OEM which is 1x1.
Spoke to Vorsteiner and details will be released as soon as I get them. There will be old skool VCSL parts along with different versions….I've seen some pics and I'm waiting for more so I can start a new thread with the correct info and prices etc.
People don't mind putting shitty commie sweatshop parts on their cars because they can't afford better.
Are you referring to the made in Germany Alsatek bumper that Epoustouflant posted? People are getting so aggressive that this thread is hard to follow. Might need some clean up...
2005 IR/IR M3 Coupe
2012 LMB/Black 128i
2008 Black/Black M5 Sedan
Comment