CSL SMG tank installation?

[nextelbuddy]

I'm sure this was covered many many years ago and some write up somewhere that I just can't find for some reason.

I have the CSL expansion tank with the bracket and like an idiot. Thought it went on the little mounting stud on the shock tower but that obviously does not work.

How are people mounting this tank to their driver side shock tower?

This bracket has two holes. It looks like you're supposed to spot weld it in place or something

I was thinking maybe using my riv nut gun, finding a good location and drilling two holes and using riv nuts?

I can't believe I can't find a video or write up that actually shows how to install the tank. It's almost like people are just securing it with velcro or something and sending it lol

I'm going to take a wild guess and this is just one more thing that the CSL chassis has is an additional provision on the shock tower for the tank?

[karter16]

This thread has some good info. https://nam3forum.com/forums/forum/m...tting-too-high

Essentially if you want to mount the bracket in the CSL stock location you need to bolt/rivet to the tower. Alternative suggested in that thread is to use a DIY bracket and mount to the threaded stud.


Sent from my iPhone using Tapatalk