If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
It is definitely fixable. I do not re-oil, the pump, i try to keep it as dry as possible when assembling, once assembled and secure to pump body, before putting back the tiny filter, i drop some chf11s into the tiny hole, then rotate the pump manually from the shaft on where the electric motor the goes, this would give it some fluid so its not dry.
hope this helps..
your experience sharing definitely helps tons.
I'll try to redo my work and follow all the steps suggested ~
Comment