Adjustable swaybar end link recommendation

[Tbonem3]

I got whiteline. They're on amazon lol.

[Maxima SE]

I realize not everyone is looking for "the best", but from what I've seen nobody makes a higher quality end link for our cars than SPL

https://www.splparts.com/products/bmw-e46-front-endlinks.html

Maxima you should do some research on Godspeed, that stuff is garbage. I'm glad it's worked out so far, but I wouldn't trust their parts to be on my car if you paid me. Literally 'the lowest bidder' type stuff.

Could be. They looked very well made but I don't have thousands of miles on them either.

[bigjae46]

I bought mine from Bimmerworld. I've since replaced the rod ends with parts from McMaster-Carr. I think it was $30 per end including the hardware?

[bavarian3]

Alright folks I pulled the bar, regreased it with "copiuos" amounts, and re-torqued the end links. No more clunks.

I thiiink what I got wrong was not getting enough torque on the little lock nuts(the ones for the rod threads). Without them tight the end links' balljoints have a lot of play. I don't have a ton of confidence these are going to stay tight and noise free but lets see.

[digger]

I realize not everyone is looking for "the best", but from what I've seen nobody makes a higher quality end link for our cars than SPL

https://www.splparts.com/products/bmw-e46-front-endlinks.html

Maxima you should do some research on Godspeed, that stuff is garbage. I'm glad it's worked out so far, but I wouldn't trust their parts to be on my car if you paid me. Literally 'the lowest bidder' type stuff.

Those are not sealed. I wouldn’t waste my time and money on anything like that if you do any decent amount of miles they are guaranteed to wear out prematurely

[Derek //M]

I got whiteline. They're on amazon lol.

That's what I did!