Adjustable swaybar end link recommendation

[samthejam]

For my MCS I use, E28 swaybar links as they were what I had laying around but work great.

Make sure at ride height and at any lock situation your links aren't binding or at weird opposing angles.

Also, they can come loose again after install so check the fasteners. I love marking stuff with paint pen. They also have real stuff for it.

https://racegerman.com/products/torque-seal?srsltid=AfmBOor5LnTMxBUBrNpixvL2N8BQpZqfPDcpTPouO-wgqFBuS6cV0Fp2

[elbert]

Good info!! I need to cal them and ask if they can offer custom lengths..I'm not sure what you guys are doing but MCS/JRZ suspension need very short endlinks..the standard run of the mill links are too long.

Yes, thank you. I'm the one who figured this out.
He will do custom lengths -- just contact him through his ebay store the total length you need. For my MCS 2WR, I had him make 200mm length, but you will want to check if this works for your car.

https://www.ebay.com/itm/313791623774

[fattycharged]

I ended up just using BW 10-11.5” adjustable links they suggested for the MCS 2WR, no issues noticed during install with length, but that’s a far cry from 200mm


Sent from my iPhone using Tapatalk

[elbert]

I ended up just using BW 10-11.5” adjustable links they suggested for the MCS 2WR, no issues noticed during install with length, but that’s a far cry from 200mm

Yeah, which is why I said to double check, but he said he needed shorter than stock, as did I.
I suspect the link mount location for MCS might depend on from where you buy them. I got mine from Anze, not Bimmerworld.