Announcement

Collapse
No announcement yet.

ECU Coding Recommendations SoCal - SAP Delete

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    ECU Coding Recommendations SoCal - SAP Delete

    Anyone with recommendation for ECU coding in SoCal?

    Installing headers and want to pull SAP while I'm in there.

    Would send out to Kassel, but don't want to be without a running car... More so than you already could be, driving an E46 M3.

    Also... Shift lights would be a fun bonus.
    Tags: None
    #2
    You can do it yourself very easily.

    Using the MSS5x Binary Modification Tool - ECUWorx
    http://www.ecuworx.co.uk/how-to/using-the-mss5x-binary-modification-tool/
    First and foremost, ECUWorx offer no warranty of any kind, we are not liable if you break your car by incorrectly flashing your ECU/DME. You do so at your own risk! You will require the following: A copy of the MSS5x Binary Modification Tool, available here A fully charged laptop and a copy of BMWFlash or MSSFlasher. Available from here: BMWFlash or a copy of from here: MSSFlasher A FTDI based OBD2 diagnostic cable such as a BMTechnic cable / BM or a KKL Vag-Com cable. yIf you don’t have one, you can buy one from here A trickle charger
    2002 Topasblau M3 - Coupe - 6MT - Karbonius CSL Airbox - MSS54HP Conversion - Kassel MAP - SSV1 - HJS - PCS Tune - Beisan - MK60 Swap - ZCP Rack - Nogaros - AutoSolutions - 996 Brembos - Slon - CMP - VinceBar - Koni - Eibach - BlueBus - Journal

    2012 Alpinweiss 128i - Coupe - 6AT - Slicktop - Manual Seats - Daily - Journal

    Comment

      #3
      Ecuworx. I was scared to do it but it’s super simple.
      06 ZCP SMG | HTE CSL MAP QuaranTune | SL CSL Airbox | Eventuri Scoop | DMG Strut Bar | RE El Diablo | CPI Euro200R | AP Headers | Porsche BBK | ST XTA | TMS 3-Pulleys/F-Sway/Mono FCAB | AKG Trans/diff/Subframe/RTAB | SPL RCA | SGT SCZA Trunk | ACL | Beisan | Redish | AFD E85 |

      Budget CSL MAP Conversion

      Comment

        #4
        This tool is awesome. I love it. It just got an update too.
        This is my Unbuild Journal and why we need an oil thread
        https://nam3forum.com/forums/forum/m...nbuild-journal

        "Do it right once or do it twice"

        Comment

        Previous template Next
        Working...
        X