Does anyone have the S code for the connector for the solenoids on the SMG pump? When my engine let go 5 years ago, it took out the connector mostly. The seal still held so I left it alone. In the midst of a rebuild and figured I'd replace it.
-
This is my Unbuild Journal and why we need an oil thread
https://nam3forum.com/forums/forum/m...nbuild-journal
"Do it right once or do it twice" -
2005 ///M3 SMG Coupe Silbergrau Metallic/CSL bucket seats/CSL airbox/CSL console/6 point RACP brace/Apex ARC-8s
Build Thread | Community Patch | MSS54 DS2 Tool -
Read your post and was just thinking about my last SMG project, I don’t have the connector PN but the guys at mlreng do sell the whole harness so they might or you could go with a fresh harness.
Comment
-
I had contacted them as a failsafe but I was trying to order through my parts department quickly. I ended going next door to Porsche and one the techs hooked me up with the connector out of their repair kits.This is my Unbuild Journal and why we need an oil thread
https://nam3forum.com/forums/forum/m...nbuild-journal
"Do it right once or do it twice"Comment
Comment