Tips on replacing S54 ///M-blem?

[sasha]

My emblem (as I'm sure many) has bubbled up. I found the part number (11617831266), it seems to have the adhesive inherent, so all good on the install side. But any tips on removal? I'm sure I could manage with some adhesive remover, plastic trim tool, and floss. But for such a focal point of the engine, a scuff or scratch would be tragic, seeking experience.

[sbay]

I just used a flat head to remove the emblem and the left over adhesive…inb4 crucified

[Estoril]

Loop dental floss under the end. Zip...zip...zip.

[Tbonem3]

Flat head or plastic interior panel removal tool. Doesn't matter if you slightly damage the plastic underneath (you shouldn't if you excerise decent caution) - the new adhesive will deform and match the surface.

Dental floss for the emblem on the trunk imo. The engine beauty cover emblem is recessed, so I don't think you'd have an easy time trying floss under there, plus I don't think the floss won't glide on the rougher plastic like it would on a painted surface.

[TexaZ3]

Helps if your engine is somewhat hot - easier to peel off.

[SQ13]

Screwdriver + microfiber cloth to protect the exposed plastic. The old one was brittle and came off easily in pieces, scraped off the old residue, clean, apply new emblem. Easy.

[maupineda]

Dental floss

[sasha]

Thanks folks