What did you do for your M3 today?

[WestBankM4]

Pulled the CSL trunk out of storage, it has a 09/22 build date. I have all the accompanying OEM pieces to install at the same time, I remember reading somewhere that the screws were incorrect though?

Anyway, I've completed the license plate lights wiring, using the guide found on these boards.

I plan on test fitting everything tomorrow, so far it looks fairly plug and play, Karbonius seems to have fixed the inner tail light issues this batch.

Sent from my Pixel 9 Pro XL using Tapatalk

[maupineda]

My Karb CSL Concept engine cover is on its way! I also are in the process of getting a front chassis reinforcement plate in carbon.

[Bornacane]

Replaced my mirrors and shifter knob. Doing the boot tomorrow.

[Cubieman]

Looks exactly like what's in our e46.

I get nervous servicing some of these things that aren't ment to sometimes, all these orings/gaskets I am replacing are fine, just wanted a project, and I got one.

I did install this oring kit on a customer car a long while ago and it turned out well.
Both the duration of the pump running and frequency decreased as well as quicker shifts, his orings were much more deteriorated than mine however.

I also plan to "fix" the wiring up top, either with new wiring (I have a new pigtail) or shrink wrapping the existing wires.
The wires up top on the transmission have a tendency to loose their insulation where they enter the platic, short out, and cause issues.

I managed to get CHF11s all over the wiring, I hope it didn't wick itself up into the plastic portion.

Here's a photo to make sense of my long run on explanation of all this, lol.

[oceansize]

Not much on the M3 as of late but have the SMG3 out the M6 for a LW flywheel, R.M.S, new orings all around on the SMG, new SMG pump motor etc.

Looks exactly like what's in our e46.