What did you do for your M3 today?

[Gt4]

Nice wheels! what are the specs?

19x9.5 et32 & 19x10.5 et19

Can't wait to install them, should be pretty tight with 245/35/19 & 275/30/19

[elrichmeister]

Just got my BBS RS2 back from the welding shop. Decided to weld lips and barrels together instead of the hidden hardware finally. Next step: mounting tires on them

Nice wheels! what are the specs?

[Gt4]

Just got my BBS RS2 back from the welding shop. Decided to weld lips and barrels together instead of the hidden hardware finally. Next step: mounting tires on them

[9kracing]

Very nice!

You ever decide to sell those, PM me

[M3LSB.Gab]

Dope, what are the specs on these?

BBS RS2 714/700 – 3-Piece 19” Stepped Specs:
• Bolt pattern: 5x120
• Sizes: 19x9 ET25 (Front) / 19x10.5 ET30 (Rear)
• Professionally converted to 3-piece using hidden hardware

[Gt4]

Just got Ohlins Dedicated track coilovers for my LSB M3

[0-60motorsports]

I found a local set of BBS RSII. Will be polising them, installing PS4S tires and waiting to find a clean E46 M3

Beautiful

[9kracing]

I found a local set of BBS RSII. Will be polising them, installing PS4S tires and waiting to find a clean E46 M3

Dope, what are the specs on these?

[siamkazi]

Rear headrest go-pro bracket for POV on these amazing fall evenings (used an older action cam to test):

[M3LSB.Gab]

I found a local set of BBS RSII. Will be polising them, installing PS4S tires and waiting to find a clean E46 M3

[maupineda]

Made some progress. I applied the primer, I mixed it as a surfacer. Came out good with very few dust particles. Not concerned at this point as it needs to be sanded to make it flat. The area I repaired came out ok. Not perfect, but I think I can level the primer just enough to make it invisible once colored and cleared







And this is the side I repaired.

Sanded the primer on the repaired area and super happy with the result, I cannot tell where the damage was. I just need to finesse the edge, it may not be perfect but for the untrained eye, nothing happened there

[1000hp]

Subframe (plates + topside brace)
RTABS
Diff bushings
Pinion and axle seals
Rear ball joints
Rear adjustable LCAs
Front control arm bushings
P/S pressure hose
P/S pressure regulator shims (added 2)
Poly steering shaft flex coupler
Megan headers
(Been dicking with it for a few weekends but wrapped it all up today).

[6speedS54]

Replaced detents on top of the transmission, roller with a spring on the side behind the GPS, and shifter rod seal. Guess I now know why the shifter was popping out intermittently 😂😂 The shifting feel is much tighter now than before.

[PSUEng]

Thought I'd get one of these, seemed to be a good deal.

[zzyzx85]

Inspected the parts I bought for it.

Freaky Parts front Brembos:


Porsche 996 rear Brembos: