Brake Bias Calculator Help

[SQ13]

Hey guys. I’ve been trying to get access to clawhamm3r’s brake bias calculator google sheet, but my requests to access the sheet have not been approved for over a week. I was hoping someone with access to it would be able to plug in some numbers and let me know what the bias is for a front StopTech C43 BBK paired with stock rear brakes and with a 996 rear conversion. Measurements for the C43 front kit below..please let me know if you require more info.

38/44 mm pistons
332mm rotors
50 mm or 43 mm radial pad depth (two options, prob will go with 50)

Thanks

[zivagolee]

I made a copy awhile back and I can share it with you and you can copy it to your drive. I think I inputted everything correctly here:

[maupineda]

Do you have a ZCP or Regular M3, MK20 or MK60?

[maupineda]

This is what I estimated for the different setups you have in mind

[mrgizmo04]

This is what I estimated for the different setups you have in mind

What do you include in the torque calc after the piston area calc?

Sent from my SM-G950U using Tapatalk

[clawhamm3r]

[EnzoAtMonza]

I run a st40 996 setup and it is to front bias for my liking. I am planning on playing with pad compound this year to see if I can get the feel I am looking for worst case I have a booster delete with bias adjustment to push it back a little. Car has been down for over a year so I cant really remember how bad it was just that I didnt like it.

Jeff

[SQ13]

This is what I estimated for the different setups you have in mind

Thanks for sharing. Looks like 996 wouldn’t be ideal.