Jeff
Attached Files
-
Anyone know where the vac line reference ends. I just finished my intake install only to see it was disconnected and I would rather run a new line if possible than take off the box. Thanks
Jeff -
It connects to another hose that is behind the airbox. Check to see if the longer hose has fallen down -
Any chance you know where that hose terminates? I can see the other hose but cant get to it without risking scratching the carbon it got pushed way down there. Thanks
JeffComment
-
It goes the the fuel pressure regulator that's under the car by the fuel filter iirc.2002 Topasblau M3 - Coupe - 6MT - Karbonius CSL Airbox - MSS54HP Conversion - Kassel MAP - SSV1 - HJS - PCS Tune - Beisan - MK60 Swap - ZCP Rack - Nogaros - AutoSolutions - 996 Brembos - Slon - CMP - VinceBar - Koni - Eibach - BlueBus - Journal
2012 Alpinweiss 128i - Coupe - 6AT - Slicktop - Manual Seats - Daily - JournalComment
-
^ Yes
Sent from my SM-G950U using Tapatalk
Youtube DIYs and more
All jobs done as diy - clutch, rod bearings, rear subframe rebush, vanos, headers, cooling, suspension, etc.
PM for help in NorCal. Have a lot of specialty tools - vanos, pilot bearing puller, bushing press kit, valve adjustment, fcab, wheel bearing, engine support bar, etc.Comment
-
Fantastic that is what I was hoping for. Thanks allComment
-
i also have this hose (about a few inches long?) disconnected while replacing o-rings on injectors and air rail.
It seems like the hose fell out very easily without force (or you call it frictionless)
The other end that connects to a transparent plastic barb is also very easy to fell out.
Is this normal?
and what is the part number of this little hoseLast edited by y2k_o__o; 11-06-2023, 12:41 PM.Comment
Comment