Announcement

Collapse
No announcement yet.

Dreams do come true: '05 Alpine White Introduction

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Dreams do come true: '05 Alpine White Introduction

    On December 31st I bought my childhood dream car, this 2005 Alpine White E46 M3. Ever since I played NFS: Most Wanted on my older brothers PS2 back in the day, I knew I had to get one someday, and now I own one. Even amidst the pandemic, everything seemed to fall into place for me this year-- I graduated college, got a job, and was finally able to put away some money.

    I wasn't too picky when I was searching for "the one". I had a solid budget of $20k, wanted something with excellent service history, good bodywork, Coupe + 6-Speed, and a color different from the standard Carbon Black/Titanium Silver. I wanted something with lower mileage (around the 100k mark) but wasn't opposed to higher miles with good history (this is key).

    Two weeks ago, 02_lsb told me that a friend of his was going to sell his Alpine White soon and gave me his number. The seller is the owner of GT Performance, a Porsche race shop in Maryland. The first time I laid eyes on the car it was parked next to his Guards Red 997.1 GT3 and I knew I had to have it. We got the ball rolling and I was able to bring this beauty home.

    Click image for larger version

Name:	IMG_2655.jpeg
Views:	721
Size:	184.0 KB
ID:	76709

    Full Specs:

    2005 BMW M3
    - Alpine White on Dove
    - 6-Speed Manual
    - 143k Miles
    - Business CD, PDC, Power Seats (Non-Heated unfortunately), Xenons, Anthracite Headliner, Sunroof, and a few other goodies.
    - NO RUST 😎

    Mod List:
    - KW V2's
    - Short Shift Kit (Unknown Brand)
    - Supersprint Lightweight Section 3 w/ Rasp Eliminator Pipe
    - Dice MediaBridge w/ Bavsound Speakers
    - Could have gotten BBS CH's but 02_lsb snaked me out of them LOL

    Sent it through a PPI and it was pretty clean, but there are a few issues I need to address:
    - The OEM 19's need tires immediately
    - Left front control arm ball joint has play
    - Oil Pan Gasket is leaking (see more on this below)
    - Motor/Trans mounts are old and starting to mushroom
    - Not major but the driver's Dove seat is in pretty rough condition (why is every single Dove Grey interior in poor condition?) All of the other seats, door cards, and dash are in great condition though.

    The rod bearings were allegedly done (by the owner before the one I bought the car from) around 130k miles but the seller couldn't find the service records. From my research doing the oil pan gasket is 90% of the rod bearing job so I should probably just do them again, correct? Beisan Vanos upgrades were also supposedly done but similar situation-- I will probably get the valve cover off soon to check the Vanos.

    My Indy and I inspected the subframe up on the lift and there were no visible cracks at the moment. I know everyone is going to tell me it's definitely cracked, but I'm kicking that can down the road until later in 2021

    Besides those issues, I do believe I've scored an incredibly clean car and I'm so excited to truly be apart of "the club" after lurking and posting on both here and the OG M3Forum for so many years. Dreams really do come true, and hard work certainly pays off.

    2005 BMW ///M3 Alpine White/Imola Red 6MT

    #2
    Congrats!
    Just some old shitty cars.

    Comment


      #3
      Congrats man and welcome to the club.

      I'd probably do the bearings if you're doing the oil pan gasket and are unsure of the condition of the current ones. The only added labor involves getting the oil pump off and swapping out the bearings. ACL bearings are like $100 so there isn't too much added parts cost either.

      ​​​​​​I feel like I have to say this too. Your subframe mounts are most likely cracked lol.
      2002 Topasblau M3 - Coupe - 6MT - Karbonius CSL Airbox - MSS54HP Conversion - Kassel MAP - SSV1 - HJS - PCS Tune - Beisan - MK60 Swap - ZCP Rack - Nogaros - AutoSolutions - 996 Brembos - Slon - CMP - VinceBar - Koni - Eibach - BlueBus - Journal

      2012 Alpinweiss 128i - Coupe - 6AT - Slicktop - Manual Seats - Daily - Journal

      Comment


        #4
        Congrats! Yeah, if this is a keeper then you may as well do the big 3 right - RACP needs topside reinforcement for a proper fix that will last.

        Comment


          #5
          Congrats!
          BMW / E46M Interior & Trim Restoration.
          https://nam3forum.com/forums/forum/c...ch-restoration

          Comment


            #6
            Congrats, welcome.

            Don't kick any cans down the road maintenance wise, if you want to enjoy the car.

            Sent from my SM-G950U using Tapatalk

            Youtube DIYs and more

            All jobs done as diy - clutch, rod bearings, rear subframe rebush, vanos, headers, cooling, suspension, etc.

            PM for help in NorCal. Have a lot of specialty tools - vanos, pilot bearing puller, bushing press kit, valve adjustment, fcab, wheel bearing, engine support bar, etc.

            Comment


              #7
              Love alpine! Congrats

              Comment


                #8
                Lmao i read your post in the other thread about comments. And yes youve been missing out but no more 😎

                Comment


                  #9
                  Very nice! AW was actually my first color choice when I was looking
                  2004 Silbergrau Metallic 6MT
                  Karbonius/OEM Snorkel/Flap/HTE Tuned
                  Ssv1/Catted Sec. 1/SS 2.5" Sec. 2/SCZA

                  OE CSL Bootlid/AS SSK/BC Coils/4.10 Gears/ Sportline 8S Wheels/Cobra Nogaros
                  RACP Plates/Vincebar/CMP/Turner RTAB/Beisan

                  2006 M6 Black Saphire SMG
                  Instagram

                  Comment


                    #10
                    Awesome, congrats! I know you've been circling for a long while, now :P

                    2005 IR/IR M3 Coupe
                    2012 LMB/Black 128i
                    2008 Black/Black M5 Sedan

                    Comment


                      #11
                      My gray driver bolster was rough, and oem leather by the inch didn’t seem to be available (unless you want a whole oe seat cover at big big bucks)... the upholsterer matched up the oe M3 gray to “Orion Gray” by Mercedes and to my eyes it’s an exact match. Something to consider if you pursue seat repair... good luck with the car and congrats!

                      Comment


                        #12
                        What order do you guys think I should tackle the maintenance in? I was thinking

                        1.) Tires first
                        2.) Oil Pan w/ Rod Bearings and Motor/Trans Mounts. Thinking about going with this kit from FCP Euro: https://www.fcpeuro.com/products/bmw...-1124783440kt1
                        3.) Front Control Arms and FCAB's (driver's side is pulling). At the same time, I think I'm gonna raise the KW's and then get an alignment.
                        4.) Save up for Cooling System Upgrade and Subframe Reinforcement ($$$)

                        In this order. Do you guys think I'm on the right track with this or am I missing something?

                        Also, can I DiY some of this stuff? My Indy is great but expensive and I'd love to learn how to work on this car. It looks more complicated to work on than my Ford, but it isn't a DD and I can take it off the road to work on it.
                        2005 BMW ///M3 Alpine White/Imola Red 6MT

                        Comment


                          #13
                          You can absolutely DIY if you don't mind getting underneath the car and want to learn some things. Non of those is particularly difficult. Just buy yourself a techangle and engine support for the rod bearings (or a whole toolset) and work in a clean environment. Looks like a nice pick up. I think stock cooling is fine, no need to upgrade any parts, just replace with OEM.

                          Comment


                            #14
                            Perhaps find out when the coils and spark plugs were replaced last. Those are easy replacements you can do at home with simple tools

                            Comment


                              #15
                              Originally posted by MTiz View Post
                              What order do you guys think I should tackle the maintenance in? I was thinking

                              1.) Tires first
                              2.) Oil Pan w/ Rod Bearings and Motor/Trans Mounts. Thinking about going with this kit from FCP Euro: https://www.fcpeuro.com/products/bmw...-1124783440kt1
                              3.) Front Control Arms and FCAB's (driver's side is pulling). At the same time, I think I'm gonna raise the KW's and then get an alignment.
                              4.) Save up for Cooling System Upgrade and Subframe Reinforcement ($$$)

                              In this order. Do you guys think I'm on the right track with this or am I missing something?

                              Also, can I DiY some of this stuff? My Indy is great but expensive and I'd love to learn how to work on this car. It looks more complicated to work on than my Ford, but it isn't a DD and I can take it off the road to work on it.
                              I went with the same rod bearing kit from FCP. Working on it slowly over the winter. Add a new steering coupler and additional bolt (one included in the kit) while you're at it.

                              FCP also has a whole front control arm kit with tie rods, etc. E46M3CAKITFULL

                              Congrats on the new ride!

                              Sent from my SM-G950U using Tapatalk

                              Comment

                              Working...
                              X