Feeler: Girodisc 2-piece floating rotors for E46 M3

[pawa_k2001]

Any updates? Looking for rear rotors for my winter project.

[Mattn1192]

Are these a significant difference from the OEM ZCP/CSL rotors?

[r4dr]

We're finally hitting our slow season, and with the break we have been able to start going down our prototypes list. These fronts are definitely on there, but the rears are a question mark.

[pawa_k2001]

If the rears happen, please give us a heads up. I am down for a 2 sets.

[Tonggi]

Fronts + rears:

9. Tonggi (Porsche rears)

Would even be 100% if you can do a different design than just plain slotted.

[elbert]

I would like to reiterate my interest in the rear rotors for Porsche calipers.

[pawa_k2001]

Any updates? In need of rear rotors for my winter refresh.

[r4dr]

I'm pushing to do the rear rotors with either the shorter annulus Porsche pad (for those with the Porsche calipers) or as a last resort, a modified stock pad. I need to source a RR rear bracket so we can mock it up on my car on our lift.

[enjoy_m3]

Will it work with a zcp rear caliper?

[r4dr]

Will it work with a zcp rear caliper?

If we go the route I just described, then yes. The pads would need to be clearanced which we have done in the past, and would supply instructions or offer this as a service if required.

[Cronenberged]

If we go the route I just described, then yes. The pads would need to be clearanced which we have done in the past, and would supply instructions or offer this as a service if required.

Put me down for both front and rears. I like the OE size but there aren't nearly enough options.

[pawa_k2001]

Any updates?

[Cronenberged]

Will it work with a zcp rear caliper?

The rear zcp caliper from my understanding is the same size as the non ZCPs. The piston was just larger.

[slavik1988]

I'm pushing to do the rear rotors with either the shorter annulus Porsche pad (for those with the Porsche calipers) or as a last resort, a modified stock pad. I need to source a RR rear bracket so we can mock it up on my car on our lift.

I can supply you with a bracket for the Porsche rear caliper bracket and if need be the caliper for a couple months. PM me.

[EthanolTurbo]

Sign me up for front and rears for Porsche 996 calipers.