Interest in Supersprint V1 & V2 headers

[CrisSilberGrau]

Also I didnt know you could get a custom SS Race muffler with 2.5in piping, that may reduce the fuck you loud, but it would still be annoyingly loud due to the lightness.

With the new exhaust setup, I actually find it less loud at mid to high rpm. Lower rpm range seems the same. The quality of the tone has improved drastically and the rasp has been reduced even with losing a resonator in sec1. As mentioned before I think the diameter of the pipes and thickness of the 304 steel has had an effect of resonance and volume (loudness). It's a more refined exhaust note, just not crazy about it like I was before.

My main motive for it was power, and this is the endgame in that department. Will tune again with HassanEido to see the power difference between the two, hoping to get close to 340whp.

[CrisSilberGrau]

Looks like ECS is having another sale on Supersprint products.

https://www.ecstuning.com/Search/Sit...3_Supersprint/

That's weak sauce. Way for this group buy, if its anything above 25% (which is what I got last year for boxing day) just jump on it. If not wait until boxing day, black friday etc. Im in Toronto and got my SSV1s for 1,49xUSD and res Sec2 USD600ish, plus taxes and cross border charges it wasnt the easiest but I looked around and it was by far the best deal at the time.

[Sharocks]

Alright it's Monday, what's the word with the boys in Ohio?

[F360C]

Alright it's Monday, what's the word with the boys in Ohio?

Idk if this is bad news or not but the ECS tuning website says the stepped header part number is no longer available.

[Epoustouflant]

I got some, but not all rates. Getting there.

[Lip]

I recently went from oem euro scza to full ssv1 scza these were my findings with weighting:

SS V1 headers 15lbs
SS Sec 1 (non cat/res) 12.5lbs
SS sec 2 20lbs
Total 47.5 lbs

OEM Euro Headers 10.5lbs
OEM US Sec1 + 2 35lbs
Total 45.5 lbs

Are you missing the section 2 in your OEM+SCZA setup?


Sent from my iPhone using Tapatalk

[Tbonem3]

He put sec 1 & 2 together for 35lbs

[sc_tr0jan_m3]

let's be honest, you won't be saving much weight from sect 1/2. it'll be in the sect 3 where you'll see any meaningful savings.

[Epoustouflant]

Should be launched within the hour

[keljos]

Should be launched within the hour

Fellas - start yer engines

[ASAed330]

Hi Matt,

I see the GB is live, but I don't see my SKU options available in this GB?

044833 (with H-pipe connector). This was confirmed with Alessandro that it is a custom add on that does not need a new SKU.
042503
044806

[///MontereyM3]

So basically there's no option to get headers only? Buying a catted section 1 is required? Wack, waited a couple weeks for this GB...

[F360C]

So basically there's no option to get headers only? Buying a catted section 1 is required? Wack, waited a couple weeks for this GB...

yeah this is disappointing if true… I just want headers

[mtpktz]

60mm resonated section 2 is not available? It shows as an option but if I select it says out of stock.

[Epoustouflant]

Hi Matt,

I see the GB is live, but I don't see my SKU options available in this GB?

044833 (with H-pipe connector). This was confirmed with Alessandro that it is a custom add on that does not need a new SKU.
042503
044806

Still awaiting a validation on the SKUs and pricing from ECS.