03.5 LSB on LSB 6MT Restoration / Progress Journal

[Albino09]

LSB/LSB M3's are so hot right now. Considering how clean yours is, I would bet you could go for $50k+.

[SGM330]

LSB/LSB M3's are so hot right now. Considering how clean yours is, I would bet you could go for $50k+.

I appreciate the kind words! I was following that auction rather closely. I'll either sell mine privately or list it on BAT when I'm ready to move on. I have a number of people are continuously ask me to sell but I'm just not ready yet. This car is so good all around!

[88mpwr]

LOVE IT!!!

[SGM330]

A few updates and pics!

Ordered new M3 mats




Ordered a spare key fob and valet key so I can have a complete set


Installed UUC DSSR and SSK EVO3 with all new shifter bushings


F10 M5 knob and boot retrofitted




Homelink added


Eisenmann Sport with 83MM tips




Here's some random pics I took over the summer




The car will be parked for winter within the next couple of weeks. During that time I'll be collecting some parts to continue refreshing the car. I already have the lines and brackets for my 996 caliper retrofit. I need to refinish the calipers over the winter before I install them in the in spring. I also have all new rear end powerflex bushings.

What do you guys recommend for plates? Turner or should I pay the difference and go with Reddish V2? Spring of 2021, I'll also be replacing the engine mounts, trans mounts, guibo, csb and front control arms bushings.

Long list but once I get most of the bigger items out of the way, I can enjoy the car a little bit before I tackle the Vanos and Rod Bearings.

Thanks for viewing!

[SandeepM3]

Looking Mint!

Go with the reddish plates. I dont know about the version2 but the standard reddish are better then the Turners.

[RoyalFlushness]

Looking good bro!

[Tbonem3]

Looking great! Are you really thinking of selling, and if so, why the big plans for 2021?

[SGM330]

Looking Mint!

Go with the reddish plates. I dont know about the version2 but the standard reddish are better then the Turners.

Thanks Sandeep!

[SGM330]

Looking good bro!

Thanks Frankie!

[SGM330]

Looking great! Are you really thinking of selling, and if so, why the big plans for 2021?

Thanks! I have no plans to sell, that's why I will continue the process of perfecting the car throughout my ownership. Most of my buddy's have 911's, that's the only time the thought of selling comes to mind! However, I love the this chassis and how DIY friendly it is. In a perfect world, I'd love to add a 911 stablemate!

[Tbonem3]

Gotcha!

[SGM330]

Completed 1 of the big 3 recently.

Dropped the car off at RMP Motors and had Rocco complete the following:

- Redish V2 Reinforcement plates
- Powerflex Black Subframe Bushings
- Powerflex Black Diff Cover Bushings
- Powerflex Black Front Diff Bushing
- Powerflex Black Front Control Arm Bushings
- Powerflex Black Rear Trail Arm Bushings
- Guibo
- Diff Pinion Seal
- CDV Delete

I also purchased a replacement subframe that I had sand blasted and powder coated so it can be as nice as it can be.

It's night and day in drivability. I love it.

Rod bearings and Vanos are next. I was thinking of replacing rod bearings next season but may replace them in the coming months. Maybe vanos too, who knows. Just want it all done sooner rather than later.

[Mattn1192]

A few updates and pics!

Ordered new M3 mats




Ordered a spare key fob and valet key so I can have a complete set


Installed UUC DSSR and SSK EVO3 with all new shifter bushings


F10 M5 knob and boot retrofitted




Homelink added


Eisenmann Sport with 83MM tips




Here's some random pics I took over the summer




The car will be parked for winter within the next couple of weeks. During that time I'll be collecting some parts to continue refreshing the car. I already have the lines and brackets for my 996 caliper retrofit. I need to refinish the calipers over the winter before I install them in the in spring. I also have all new rear end powerflex bushings.

What do you guys recommend for plates? Turner or should I pay the difference and go with Reddish V2? Spring of 2021, I'll also be replacing the engine mounts, trans mounts, guibo, csb and front control arms bushings.

Long list but once I get most of the bigger items out of the way, I can enjoy the car a little bit before I tackle the Vanos and Rod Bearings.

Thanks for viewing!

Where were you able to find these floor mats? I been looking for a longgggg time.

[S14]

Where were you able to find these floor mats? I been looking for a longgggg time.

Same, I pulled mine up last week and the foam bottom is diesntegrating.

Also, what is your complete exhaust setup, and how do you like the eisenmann sport's sound? I have AA headers & muffler and hate the noise it makes.

[Mattn1192]

Same, I pulled mine up last week and the foam bottom is diesntegrating.

Also, what is your complete exhaust setup, and how do you like the eisenmann sport's sound? I have AA headers & muffler and hate the noise it makes.

Not familiar with it. I have the AA headers & SCZA exhaust. Loving every second of it. It’s what I was looking for (not loud & annoying, but a nice deep tone). Quite a bit of rasp @ 4k rpm’s and above, but everyone tells me when they hear me drive by while stepping on it that it sounds spectacular.