Announcement

Collapse
No announcement yet.

Flashing the MK60 with ZCP software

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Click image for larger version

Name:	PfgNWZ.gif
Views:	35
Size:	852.8 KB
ID:	615547

    Man, it took forever, but I finally got a dump!
    Click image for larger version

Name:	Screenshot 2026-11-16 at 5.53.50 AM.png
Views:	35
Size:	425.7 KB
ID:	615546

    Got the non-M module to boot into the manufacturer diag protocol. From there I managed to dump the whole flash over K line. Took a while (~20 min), but at least we've got the FW now 🙂

    terra let me know if you want the image. I'll try dumping my ZCP module next.
    2002 Topasblau M3 - Coupe - 6MT - Karbonius CSL Airbox - SSV1 - HJS - Mullet Tune - MK60 Swap - E86 Front Triangulation - ZCP Rack - Nogaros - AutoSolutions - 996 Brembos - Slon - CMP - VinceBar - Koni - Eibach - BlueBus - Journal

    2012 Alpinweiss 128i - Coupe - 6AT - Slicktop - Manual Seats - Daily - Journal

    Comment


      Very nice!!! Great work
      ‘02 332iT / 6 | ‘70 Jaguar XJ6 electric conversion

      Comment


        I have no idea what's going on but sounds like progress! lol

        Comment


          Originally posted by heinzboehmer View Post
          Click image for larger version

Name:	PfgNWZ.gif
Views:	28
Size:	852.8 KB
ID:	615547

          Man, it took forever, but I finally got a dump!
          Click image for larger version

Name:	Screenshot 2026-11-16 at 5.53.50 AM.png
Views:	28
Size:	425.7 KB
ID:	615546

          Got the non-M module to boot into the manufacturer diag protocol. From there I managed to dump the whole flash over K line. Took a while (~20 min), but at least we've got the FW now 🙂

          terra let me know if you want the image. I'll try dumping my ZCP module next.
          Man that's amazing. I'm not one to say no to images haha

          Able to share anything that would facilitate me (and anyone else) dumping? I have easy access to the E85 MK60 E5 and a non-ZCP MK60 (I do have the ZCP module in my actual M3, but if it's reporting same software version as mine probably no need to dump that)?

          Comment


            I tried messaging you about this a year or two ago terra, never heard back

            The vesrah repo is me. The tooling linked previously is a bit different for the Z4 GT3 since that firmware doesn't require higher auth to enable CCP, but I can confirm that Z4 needs CCP enabled over KLine using the same process as the E90 one and then CCP is available over CAN (as the name is implied). I also have a stock Z4 module too, but the CAN transceiver seems to be dead on it so I haven't dumped that one. I may re-visit that with this other method though.

            MK60 and MK60E1 don't have CCP left in the software and the CCP left in the E5 is read only - write is just a stub. GT3 Z4 and M3 CCP CAN IDs are different, I have no idea if that carries over to stock Z4 software too, but it is easily scanned for. GT3 software has a couple weird CAN IDs that set a fault if they receive anything though, lol.

            MK60 seems -extremely- similar to E90 MK60E1 in terms of ABS logic. E90 MK60E5 and Z4 MK60E5 have more complex arbitration around the hydraulic / valving control, are configured for the VDA sensors with direction, and factor in the output pressure sensors but are otherwise very similar to the MK60E1. It is pretty obvious that the codebase is more or less just an incremental update from MK60 to MK60E1 to MK60E5. MK100 logic follows the same incremental change path but everything is laid out different since they switched to AUTOSAR from OSEK or whatever it was before.

            These modules are flashed (including motorsport) using the factory process. eg. enter bootloader from application, flash, verify signature.
            Last edited by yuba; Today, 11:10 AM.

            Comment


              I don't see any PMs from you in my inbox, but apologies if I missed anything.

              At least it looks like there's some progress after decades

              Comment


                Originally posted by terra View Post
                Man that's amazing. I'm not one to say no to images haha

                Able to share anything that would facilitate me (and anyone else) dumping? I have easy access to the E85 MK60 E5 and a non-ZCP MK60 (I do have the ZCP module in my actual M3, but if it's reporting same software version as mine probably no need to dump that)?
                Check your inbox for the image!

                Let me at least look over the code for the tooling before sharing. So far it's been 100% robot generated, so I don't particularly trust it.

                But yes, I'll share everything I have in that same repo I've been using. Silver lining to the slow dump is that it's all over K line, so in theory, any K+DCAN cable should work for this. The timing window is still pretty hard to hit without the controlled ignition signal, but with enough cycling of the key, you should be able to do it 🙂

                Also, shoutout to yuba. Wouldn't have gotten this far without them being around to bounce ideas off of and ask questions to.
                2002 Topasblau M3 - Coupe - 6MT - Karbonius CSL Airbox - SSV1 - HJS - Mullet Tune - MK60 Swap - E86 Front Triangulation - ZCP Rack - Nogaros - AutoSolutions - 996 Brembos - Slon - CMP - VinceBar - Koni - Eibach - BlueBus - Journal

                2012 Alpinweiss 128i - Coupe - 6AT - Slicktop - Manual Seats - Daily - Journal

                Comment

                Working...
                X