Inpa fuel pump test, pump noise coming from engine bay?

[E46 M3]

I'm trying to diagnose a dead check valve as I have to crank the car twice again ( Hella replaced 3 years ago)

For the life of me I cannot hear the pump priming on cold start / first start so I thought I would try to activate it manually via inpa so I can at least hear it.

However I'm not sure if this is the right test, when I activate it the pump sound is coming from the engine bay which makes no sense... to me it sounds more like the SMG pump?



Is my INPA messed up? I have a Aus spec M3 so no EKP for the pump.

[karter16]

I know what you mean - it's the same for me when I activate the fuel pump at full duty using MSS54 DS2 Tool. I thought that the noisy bit was the fuel return valve which is a lot further forward than the pump. I'm confident the sound in my case isn't the SMG pump, they're not the same sound.

Also I'm pretty certain the SMG tests are via DS2 direct to the SMG control unit not the DME, so wouldn't be possible for one to trigger the other anyway.