MSS5x Binary Modification Tool Update

[x Spades x]

https://nam3forum.com/forums/forum/m...1948#post11948

Thanks!!

[r4dr]

Can you post the oil temp settings?

https://nam3forum.com/forums/forum/main-forum/e46-2001-2006/11768-variable-pre-warning-zone?p=11948#post11948

[Martyn]

Just set the last slider to 80*C then work backwards in 5* or 10* increments.

[x Spades x]

That's more or less what my car does now that I changed it to CSL oil temp values. "Full operating temp" doesn't necessarily seem to be the middle hash mark, my gauge usually goes up or down with driving patterns.

Can you post the oil temp settings?

[r4dr]

That's more or less what my car does now that I changed it to CSL oil temp values. "Full operating temp" doesn't necessarily seem to be the middle hash mark, my gauge usually goes up or down with driving patterns.

[x Spades x]

I think you want to adjust it to so the last light goes off till it hits the first dot?

I wanted to so the last light goes off at full operating oil temp. Does anyone have a pic of the sliders for that?

[Martyn]

Hey Martyn,

I like your binary tool & I tried a few times to find out where to pay for a license/,multiple licenses. Is there a specific link?

The payment section is within the tool, under 'Action' > 'Generate license request'.

[GAM3_OVR]

Also thank you for making a perfect fitting baseplate for the Samsonas Shifter & E46 M3 I will mowst likely be buying one soon!

[GAM3_OVR]

Hey Martyn,

I like your binary tool & I tried a few times to find out where to pay for a license/,multiple licenses. Is there a specific link?

[0-60motorsports]

Email Sent Martyn

[Cubieman]

Hey Martyn, what specific damage can occur when running burble/pop with cats? I've got a Euro exhaust setup so that cats are not on the headers if that makes any difference.
Does it ruin the catalyst so it can't effectively clean the exhaustb or will melt the catalyst up and ruin your exhaust that way?

[NZ_M3]

1.6.4

[Martyn]

What version of the tool are you seeing this on?

[NZ_M3]

Martyn

I think you need to look over this software again, I’ve noticed quite a few bugs with it and have been fixing other’s tunes as a result.

for example, if you do binary modifications via tunerpro or a hex edit tool or apply an already modified file to it and make changes subsequently it does some really weird stuff to the file (makes changes in weird random places and applies incorrect dtc deletions ect).

also it doesn’t work correctly on 0301 CSL software version.

[r4dr]

Try adjusting it with the arrow keys.

That did the trick, thanks.